Scope Mount for Scar 17

[Tactical Fred]

Need recommendations on what scope mount I should get to mount a
Vortex Razor gen 111 on my SCAR. The 3 I have narrowed it down to are the following.

1. Scalarworks Leap/07 (lightest of the 3)

https://scalarworks.com/shop/quick-detach-mounts/leap-07/

2.Bobro Engineering Scar/Monolithic rail Mount

https://www.bobroengineering.com/SCARMonolithic-Rail-Mount_p_95.html

3.ADM AD-Delta scope mount.

https://www.admmfg.com/ad-delta-mount-titanium-lever

All seem to be very well made mounts. I am pretty new to optics so any advise, recommendations or tips will be very welcome. Use will be mostly range use.

[theLBC]

all of them are probably fine. i use a bobro mount on my scar 20s.

make sure you have a clean mount on the side you run the charging handle.

[gmotoring]

Cant go wrong with adm. I have it on all my rifles including scar17

Sent from my SAMSUNG-SM-G935A using Tapatalk

[heyasiankid]

[osis32]

I think most mounts are ok. It's the impulse of the scar that kills optics.

[HK Dave]

If it’s a precision or magnified rig, stay away from ADM. Worst return to zero in your choices.

[stormvet]

I had a fairly inexpensive 1piece Burris on mine with a 1x6, held zero with no issues for four years. Ended up taking it off when I went to a Elcan Specter.

[Packy14]

Need recommendations on what scope mount I should get to mount a
Vortex Razor gen 111 on my SCAR. The 3 I have narrowed it down to are the following.

1. Scalarworks Leap/07 (lightest of the 3)

https://scalarworks.com/shop/quick-detach-mounts/leap-07/

2.Bobro Engineering Scar/Monolithic rail Mount

https://www.bobroengineering.com/SCARMonolithic-Rail-Mount_p_95.html

3.ADM AD-Delta scope mount.

https://www.admmfg.com/ad-delta-mount-titanium-lever

All seem to be very well made mounts. I am pretty new to optics so any advise, recommendations or tips will be very welcome. Use will be mostly range use.

Scalar. Pricey but sooo light

[teflondog]

I used to be a Larue loyalist until I tried Scalarworks. Now I only buy Scalarworks mounts.

[CAGLS]

Scope Mount for Scar 17

I have a Spuhr qd 34mm mount non cantilever with a Schmidt Bender 3-20 Ultrashort. Mainly sits on my 6.5 Creedmore Scar 17. The qd allows me to switch to my Remington 700 5R in 6.5 Creedmore on a MPA BA competition chassis.

[theLBC]

I have a Spuhr qd 34mm mount non cantilever with a Schmidt Bender 3-20 Ultrashort. Mainly sits on my 6.5 Creedmore Scar 17. The qd allows me to switch to my Remington 700 5R in 6.5 Creedmore on a MPA BA competition chassis.

dude! sweet!