Unconfigured Ad Widget

**theLBC** · 06-21-2021, 6:53 PM

i dunno about your specific case, but i have suppressor height irons on my sig RX slides.

**res2580** · 06-21-2021, 7:41 PM

I will post picture in a bit

**teflondog** · 06-22-2021, 8:31 AM

Which mount do you have installed? There's a low mount and a high mount.

Holosun Solar Power Red Dot w/ High & Low Mounts

https://www.rainierarms.com/holosun-solar-power-red-dot/

RA EXCLUSIVE! You get both high and low mounts included with purchase of sight.PARALOW HS403C SOLAR POWER Red Dot Sight ,50,000 hours,parallax free, PEO/MAO finish,lifttime,Based on the already successful Paralow HS403A Red Dot, we have released a solar powered version, the HS403C. This new product has two power systems, one is operated by solar power only while the other operates on battery only. Out of the box, this red dot is automatically solar powered. The red dot intensity also auto adjusts to ambient light. If there is not enough light, such as at night, just press the "+" or "-" button to activate battery power. Now it will operate like a regular red dot such as the HS403A. You can adjust the intensity by pressing "+" or "-" buttons.When it is time to power down the unit, just press both buttons at the same time or simply put it away and it will turn off battery operation after 8 hours. The unit is now automatically in solar powered mode, ready when you need it. You can verify the power mode by covering the solar cell. If the red dot is on, you are in battery mode. If it is off, you are in solar mode.Features of PARALOW HS403C Red Dot Sight :Designed for day use and night visionNew advantage technology LED allows 50,000 hours of operation on one battery2 MOA on dot sizeReduced training time and ammunitionUnlimited field of viewParallax-free with unlimited eye reliefUnaffected by extreme weather conditionsDurable and reliable constructionNo hazardous materials usedNo laser emission that could be harmful to your eyesPress button brightness setting and automaticlly brightness adjustmentOPTICAL DATALight sourceLEDRed Dot Size2 MOAParallaxParallax free: No centering required, aiming with red dot anywhere inside window.Eye ReliefUnlimitedCoatingMulti-layer coating for all lens.magnification1XELECTRONIC DATABatteryCR2032Battery Life50,000 hours at setting 6Auto Shutoff8 Hours.Brightness Setting10DL & 2NV CompatibleMECHANICAL DATAHousing MaterialAluminumHousing FinishPEO/MAO housing finishHousing ColorBlackAdjust per click0.5MOAENVIROMENTAL DATAStorage Temperature-40C to 70CWorking Temperature-10C to 50CRadioactiveNone.DIMENSIONSDimension67*63*35 mm with high mountWeight124g with high mount

**res2580** · 06-23-2021, 8:49 AM

Originally posted by teflondog

Which mount do you have installed? There's a low mount and a high mount.

https://www.rainierarms.com/holosun-...power-red-dot/

The high mount is not an absolute co-witness, Its a 1/3 mount. I'm looking for a mount that makes an absolute and will work with holoson. I never has a Holosun red dot before and didn't know that it cannot just use any standard rail mount. Got it in a trade

**res2580** · 06-23-2021, 8:54 AM

This is a picture of the Holosun with high mount. The other one is an absolute co-witness height.
20210622_004731727_iOS.jpg

**teflondog** · 06-23-2021, 11:21 AM

If that's the case, you'll have to get an absolute cowitness mount for it. I believe any Aimpoint Micro mount can be used with a HS403.

**res2580** · 06-23-2021, 4:53 PM

Originally posted by teflondog

If that's the case, you'll have to get an absolute cowitness mount for it. I believe any Aimpoint Micro mount can be used with a HS403.

Thank you!

Unconfigured Ad Widget

HOLOSUN HS403C

HOLOSUN HS403C

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Calguns.net Statistics

What's Going On