Tweet
Is it possible to mount a burris fastfire 3 on a subcompact xd 3inch wihout messing with the internals? Or should i go with a dovetail? This is also my carry gun so im skeptical about the dovetail losing zero. Thanks in advance.
-
-
Good question
There are folks who make mounting plates for an RMR that uses the factory slide cut
I find that I find my irons first and the dot second shooting an RMR milled into a Glock.
Trying to find the dot, can be very slow.
My preference on a carry gun is what works for you.
The plates are cheap so that you can try a dot and if you love it, get the slide milled
EGW makes some of the platesLast edited by hermosabeach; 11-04-2020, 6:58 PM.Rule 1- ALL GUNS ARE ALWAYS LOADED
Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)
Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET
Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
(thanks to Jeff Cooper) -
Rule 1- ALL GUNS ARE ALWAYS LOADED
Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)
Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET
Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
(thanks to Jeff Cooper)Comment
-
If I get my slide cut will it affect my internals since the loaded chamber indicator seems to be in the way?Comment
-
Thank you for the link. If I buy the dovetail plate it would get pushed up by the loaded chamber indicator. So a better option would be a slide cut? We go back to the question if the slide cut would interfere with any internals.Comment
-
Would anyone recommend getting the slide milled? Would the loaded chamber indicator have to be removed?Comment
There are currently 15716 users online. 151 members and 15565 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.
Comment