Unconfigured Ad Widget

**NATEWA** · 08-17-2018, 1:12 PM

Weaver Cantilever SPR 30mm Optic Mount

https://www.mountsplus.com/weaver-spr-30mm-optic-mount.html

Check out the deal on Weaver Cantilever SPR 30mm Optic Mount at MSP - Mounting Solutions Plus

Not sure about the height.

**NATEWA** · 08-17-2018, 1:16 PM

Burris at 1.5 or 1.6, depending on model

Burris AR-P.E.P.R. Cantilever Scope Mount

https://www.mountsplus.com/burris-ar-pepr-scope-mount.html

Check out the deal on Burris AR-P.E.P.R. Cantilever Scope Mount at MSP - Mounting Solutions Plus

**NATEWA** · 08-17-2018, 1:20 PM

Other options for LOW and forward scope mounting on an AR15 ????

https://www.m4carbine.net/showthread.php?138119-Other-options-for-LOW-and-forward-scope-mounting-on-an-AR15

Curious if anyone is aware of any options/products I have not found yet. Looking to mount the scope forward for eye relief but approx ½” lower than the common 1.5” high ar15 mounts such as Bobro and ADM. They are just too high for my preference. Desired height as seen in pic below: (Scope has a 30mm tube) From rail top surface to scope body: approx ½ “= 13 mm From rail top surface to center of eyepiece approx : 1 1/32” = 27 mm . Below are the best two options I’ve found so ...

Hmm...looks like you may need a cheek riser?

What stock and scope? For an ar15?

**Usmc0844spare** · 08-17-2018, 1:37 PM

Originally posted by NATEWA

https://www.m4carbine.net/showthread...ing-on-an-AR15

Hmm...looks like you may need a cheek riser?

What stock and scope? For an ar15?

Actually that M4 thread gives me some other ideas. Backup plan would be a cheek riser but those are problematic on AR15 (I've got a separate check riser thread going on elsewhere).

Thanks!

**smoothy8500** · 08-17-2018, 1:49 PM

PRI precision reflex mount is 1.3" to scope center. $148 is a little better for a quality mount.

Just a moment...

https://www.precisionreflex.com/Detail.aspx?PROD=633987&CAT=4276

Another option is a Yankee Hill cantilever .5" riser with low or medium rings. That will keep you at 1.2 or 1.3" high. I believe A2 rear sights are 1.3 to 1.4" high. I was able to transition from service rifle irons to optics fairly easily.

https://www.opticsplanet.com/yankee-hill-machine-six-inch-rail-extension-0-5-inch-riser-yhm-9473.html

**Usmc0844spare** · 08-17-2018, 2:07 PM

Originally posted by smoothy8500

PRI precision reflex mount is 1.3" to scope center. $148 is a little better for a quality mount.

Just a moment...

https://www.precisionreflex.com/Detail.aspx?PROD=633987&CAT=4276

Another option is a Yankee Hill cantilever .5" riser with low or medium rings. That will keep you at 1.2 or 1.3" high. I believe A2 rear sights are 1.3 to 1.4" high.

https://www.opticsplanet.com/yankee-hill-machine-six-inch-rail-extension-0-5-inch-riser-yhm-9473.html

Yeah the riser thing with std rings is where I think I'll land.

Unconfigured Ad Widget

Lower height AR15 mount

Lower height AR15 mount

Comment

Comment

Comment

Comment

Comment

Comment

Calguns.net Statistics

What's Going On