Unconfigured Ad Widget

Collapse

Optic Placement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Groundhog66
    Member
    • Mar 2009
    • 166

    Optic Placement

    After some research, there seems to be a wide range of placement suggestions. Some like it centered over the ejection port, some like it closer to the rear. I know it all boils down to personal preference, but what's yours, and how did you come to your conclusion?
  • #2
    Blade Gunner
    Veteran Member
    • Mar 2013
    • 4422

    Optic Placement

    Originally posted by Groundhog66
    After some research, there seems to be a wide range of placement suggestions. Some like it centered over the ejection port, some like it closer to the rear. I know it all boils down to personal preference, but what's yours, and how did you come to your conclusion?


    Eye relief is more of a determinate of optic placement. Using pic rails and one piece mounts makes this much easier. Mount the optic snug in the mount, set your stock length of pull, set the optic at its highest power, then move the optic/mount to where the image fills the lens. Then level the optic.


    Sent from my iPhone using Tapatalk
    Last edited by Blade Gunner; 10-05-2017, 6:26 PM.
    If you find yourself in a fair fight, you're doing it all wrong.

    Comment

    • #3
      simonp
      Senior Member
      • Oct 2005
      • 1989

      Originally posted by Blade Gunner
      Eye relief is more of a determinate of optic placement. Using pic rails and one piece mounts makes this much easier. Mount the optic snug in the mount, set your stock length of pull, set the optic at its highest power, then move the optic/mount to where the image fills the lens. Then level the optic.


      Sent from my iPhone using Tapatalk


      What Blade Gunner said


      Sent from my iPhone using Tapatalk Pro
      "If you have them by the balls, their hearts and minds will follow"

      Comment

      • #4
        Kwikvette
        Veteran Member
        • Oct 2015
        • 3704

        Eye relief as stated above.

        That's why there are a variety of 1 piece mounts; some push an optic forward while maintaining their installment on the AR receiver rather than the handguard.

        There are red dots/etc. that have infinite eye relief though. For those specifically, it comes down to personal preference.
        Originally posted by longrange1
        my gun shoots better with shiny brass...plus not only does the shiny brass make me look like a pimp at the range if the sun catches it just right it blinds the guy next to me which improves my odds of winning the match.
        Originally posted by XDJYo
        Full size. Stubbies are for sissies.

        Comment

        • #5
          ProtectThe2nd
          In Memoriam
          • Mar 2016
          • 1225

          As stated...it's all about eye relief

          Whether it's a red dot or a scope...the manufacturer of quality optics states
          the range of eye relief for their product

          So in the end...your length of pull and where your cheek lands when you mount the weapon...will decide how far or close, within the stated range of eye relief, where to place your optic
          sigpic
          ESCAPE IF YOU CAN


          A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

          "The Second Amendment ex-tends, prima facie, to all instruments that constitute bearable arms, even those that were not in existence at the time of the founding." - The United States Supreme Court -

          Comment

          • #6
            Groundhog66
            Member
            • Mar 2009
            • 166

            Is the point of proper eye relief different with a Trijicon MRO, since it is not the same size from front to back?

            Sorry if that's a silly question, but I'm not sure I'm getting what "eye relief" actually is.

            Comment

            • #7
              Groundhog66
              Member
              • Mar 2009
              • 166

              Sorry, double post.

              Comment

              • #8
                Groundhog66
                Member
                • Mar 2009
                • 166

                So I just watched a review, and he said there is no eye relief on the MRO.

                Comment

                • #9
                  Blade Gunner
                  Veteran Member
                  • Mar 2013
                  • 4422

                  Optic Placement

                  Originally posted by Groundhog66
                  Is the point of proper eye relief different with a Trijicon MRO, since it is not the same size from front to back?



                  Sorry if that's a silly question, but I'm not sure I'm getting what "eye relief" actually is.
                  Last edited by Blade Gunner; 10-05-2017, 7:55 PM.
                  If you find yourself in a fair fight, you're doing it all wrong.

                  Comment

                  Working...
                  UA-8071174-1