Unconfigured Ad Widget

Collapse

Leupold Scope Ring issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rizzo
    Member
    • Aug 2012
    • 444

    Leupold Scope Ring issue

    I was doing some load testing on my Rem. 700 SPS 30-06 and noticed the POI was suddenly way too high compared to other tests.

    I checked my scope and it was loose on the rear scope ring.
    Actually the ring was still snug but the Leupold base to ring had come loose.

    "The rear ring is secured by windage adjustment screws, allowing the scope's internal adjustments to be reserved for precise sight-in."

    It's a neat design but after 30 shots or so of 30-06 the top part (ring) came apart from the friction fit Windage screws on the base and I had to re-attach it and then zero the scope again.

    This made me rethink if I want to continue using this scope mounting setup.

    Anyone have this happen?
    Suggestions/recommendations for other scope ring setup?

    Thanks
  • #2
    Ki6vsm
    Senior Member
    • Sep 2013
    • 2354

    Might help to know what style of rings and mount you have. Is it the old school swing-in-the-from-the-side type of arrangement? Or a Pickatinny type arrangement?

    Comment

    • #3
      Divernhunter
      Calguns Addict
      • May 2010
      • 8753

      I have the Leupold/Redfield scope rings/base with a Leupold 3-9X40 old Varri-X II scope. on a 30-06 Rem 760 and I zeroed it in in 1970. I still shoot the same handload. I have fired 1,000's of rounds in that combo over the years. The rifle has been roughly handled many times. The scope has dents.

      The Leupold bases/rings are the same as the old Redfield ones when they were competitors for the optics market. Now Leupold owns the Redfield name.

      IT STILL SHOOTS TO THE EXACT SAME PLACE AS IT DID IN 1970.

      It is a very sound system. I hate to tell you "I think" it is not the fault of the mount/rings but something the operator/mounter did or did not do.
      A 30cal will reach out and touch them. A 50cal will kick their butt.
      NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
      SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

      Comment

      • #4
        smoothy8500
        Veteran Member
        • Sep 2009
        • 3846

        I use the same Leupold mounts but put a drop of "Vibra-tite" on each screw thread. Vibra-tite is like thread locker but is not permanent. It prevents screws coming loose.

        Comment

        • #5
          Mayor McRifle
          Calguns Addict
          • Dec 2013
          • 7797

          Blue Loctite and a torque wrench.
          Anchors Aweigh

          sigpic

          Comment

          • #6
            THBailey
            Senior Member
            • Mar 2011
            • 737

            Originally posted by Mayor McRifle
            Blue Loctite and a torque wrench.
            This.
            THBailey


            As Will Rogers once said:
            "Everyone is ignorant, only in different subjects."

            Comment

            • #7
              JagerDog
              I need a LIFE!!
              • May 2011
              • 15885

              Originally posted by Divernhunter
              I have the Leupold/Redfield scope rings/base with a Leupold 3-9X40 old Varri-X II scope. on a 30-06 Rem 760 and I zeroed it in in 1970. I still shoot the same handload. I have fired 1,000's of rounds in that combo over the years. The rifle has been roughly handled many times. The scope has dents.

              The Leupold bases/rings are the same as the old Redfield ones when they were competitors for the optics market. Now Leupold owns the Redfield name.

              IT STILL SHOOTS TO THE EXACT SAME PLACE AS IT DID IN 1970.

              It is a very sound system. I hate to tell you "I think" it is not the fault of the mount/rings but something the operator/mounter did or did not do.
              Same here. Dovetail front, windage adjustable rear on a Browning A-bolt in 25-06 from the early 80's.
              Palestine is a fake country

              No Mas Hamas



              #Blackolivesmatter

              Comment

              • #8
                Horrendo Revolver
                Senior Member
                • May 2015
                • 1013

                I've mounted tons of scopes using the Leupold Std. rings and bases that the OP has had an issue with. Used a torque wrench but no thread locker and never had an issue reported back to me by a customer. No company is perfect though and the bases or rings could be defective. Leupold will replace them. Where I worked(Cabela's), we would have swapped them out at no charge.

                Comment

                Working...
                UA-8071174-1