Unconfigured Ad Widget

Collapse

Scope ring alignment and lapping

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Hairball
    Senior Member
    • May 2013
    • 799

    "I just don't understand why someone would not lap every set of rings they get"

    Because it's not necessary if you purchase quality rings. If you are running Badger rings and base and they "required a lot of lapping to get straight", you most likely have an alignment issue with the base or the action or the scope tube and you are simply trying to correct the misalignment issue by doing the same thing to the rings. Again, do what you feel is right but the need for lapping on contemporary quality equipment is rare.

    Comment

    • #17
      Mute
      Calguns Addict
      • Oct 2005
      • 8609

      Originally posted by Yerman
      The funny thing with lapping or not lapping rings is that you don't know how far they are off until you start lapping them.

      Once you start and you see the finish starting to come off the rings in an uneven manner, you quickly realize that they are not perfectly inline and they need to be lapped until all the finish on the inside of the rings is removed.

      Anyone that says they don't need to lap rings and never had a problem have never lapped a set of rings they thought were ok then realized they were not in perfect alignment.

      There is no possible way that rings that are not one-piece would ever be in perfect alignment right out of the box. There are too many variables in play. We are talking of 0.0001 of an inch here and no set of rings, no matter how good they are, are ever in perfect alignment without lapping.

      Now, are you going to have a problem if you don't...probably not. But I guarantee there is not a set of rings out there that would wear perfectly even if you begin lapping them and check the wear pattern.

      Lapping is such an easy process that doesn't take much time, I just don't understand why someone would not lap every set of rings they get.
      Very likely true, but I've always ran one piece so just for reference to anyone else, my good results with not lapping has always been with single piece scope mounts.
      NRA Benefactor Life Member
      NRA Certified Pistol, Rifle, Personal Protection In The Home, Personal Protection Outside The Home Instructor, CA DOJ Certified CCW Instructor, RSO


      American Marksman Training Group
      Visit our American Marksman Facebook Page

      Comment

      • #18
        Yerman
        Senior Member
        • Aug 2011
        • 1396

        Originally posted by Hairball
        Because it's not necessary if you purchase quality rings.
        My point is how do you know? You only know if you begin lapping and check the wear pattern. You can try the little pointy things that come with lapping bars, but they still don't give you a 100% accurate representation of the orientation of the rings.

        For the record, I put a set of Badger rings (pulled forward while installing and torqued using an inch pound torque wrench) on a Defiant Action a few months ago for a friend of mine. He insisted we didn't need to lap them but I convinced him to try it anyway. Sure enough, the wear patter showed that the rings needed lapping.

        Bottom line, in my opinion, every set of rings need to be lapped unless its a very high dollar one-piece ring. Anyone saying otherwise simply doesn't know if their rings need lapping because they have not lapped their rings and checked the wear pattern.

        In other words, you need to lap your rings to find out if you need to lap your rings. Simply stating "I don't have a problem" does not mean your rings don't need lapping.
        Last edited by Yerman; 03-07-2017, 3:21 PM.

        Comment

        • #19
          Carcassonne
          Veteran Member
          • Jul 2012
          • 4897

          Originally posted by Hairball
          "I just don't understand why someone would not lap every set of rings they get"

          Because it's not necessary if you purchase quality rings. If you are running Badger rings and base and they "required a lot of lapping to get straight", you most likely have an alignment issue with the base or the action or the scope tube and you are simply trying to correct the misalignment issue by doing the same thing to the rings. Again, do what you feel is right but the need for lapping on contemporary quality equipment is rare.

          There are other factors besides just the rings; The receiver might not be flat/straight; the ring base may not be straight/flat; the individual rings may not be the same height (they could be off by as little as 0.0005", but they are still off); each side of the base may not be parallel.

          Lapping ensures everything is stright before the scope is clamped, but if you have a POS scope it wouldn't matter.


          .
          Be sure to ask your doctor if depression, rectal bleeding, and suicide are right for you.

          In the United States a person's expertise on a subject is inversely proportional to their knowledge of the subject: The less they know about something, the more they become an expert on it.

          I am being held hostage in a giant insane asylum called Earth.

          Comment

          • #20
            Garand1911
            Senior Member
            • Sep 2002
            • 1443

            check it with alignment rods first to determine if lapping is needed.

            I have Leupold Mark4 rings on my AR, and the alignment rods showed them to be off center, lapping cured it. I have pics of the before and after, and I think it had more to do with the AR upper receiver than the rings.
            "I saved your life, AND brought you pizza" -- Me

            Comment

            • #21
              3DGearGuy
              Vendor/Retailer
              • Jun 2012
              • 804

              All good info...

              It makes perfect sense that a two piece set of rings wouldn't be in perfect alignment.

              As I'm understanding it...two rings that aren't connected in any way and there are variables in the rings themselves, the screws, the base of the rings, the base they mount to, the receiver itself. Even if we're off by only 1/1000th of an inch on each piece, all the pieces having that small variance, multiplied by two rings, would equal a noticeable difference across the two rings.

              It seems like one of those "better safe than sorry" items. Sure, it may not be a big enough difference to affect anything, but then again, it could be enough to put unnecessary stress on the scope tube.


              Sent from my iPhone using Tapatalk
              3DGearGuy - 3D printing freedom since 2020! Use code CG10OFF for 10% off all orders of $15 or more!

              Comment

              • #22
                dieselpower
                Banned
                • Jan 2009
                • 11471

                Originally posted by Carcassonne
                I always lap the rings. Sometimes it just takes a few passes (~5), and other times it may take an hour (Cheapo Chinese junk rings).

                I suggest you buy a lapping and alignment set. They are not that much. You can always sell it here or on eBay when you are finished.


                .
                This. The rings or base tells you if they need lapping. Leupold recommends lapping on all rings no matter who makes them, while high end single mounts should not need lapping at all. If you are paying $100 or more, you shouldnt need to lap.

                Comment

                • #23
                  Carcassonne
                  Veteran Member
                  • Jul 2012
                  • 4897

                  Originally posted by idlplumb
                  All good info...

                  It makes perfect sense that a two piece set of rings wouldn't be in perfect alignment.

                  ...

                  It seems like one of those "better safe than sorry" items. Sure, it may not be a big enough difference to affect anything, but then again, it could be enough to put unnecessary stress on the scope tube.

                  Originally posted by dieselpower
                  ... while high end single mounts should not need lapping at all. If you are paying $100 or more, you shouldnt need to lap.

                  I lap 1-piece ring mounts also. I have a Colt and a Warne 1-piece mount, and both had some burrs that needed to be lapped down to give the scope a smooth surface to lie on. You have to be a little careful when lapping a cantilever 1-piece mount. Do not put a lot of down pressure on the front unsuported cantilever section. To much down pressure will cause the front ring seat to flex downward. If you lap the front while it is being forced down, it will be off when it relaxes back to normal.


                  .
                  Be sure to ask your doctor if depression, rectal bleeding, and suicide are right for you.

                  In the United States a person's expertise on a subject is inversely proportional to their knowledge of the subject: The less they know about something, the more they become an expert on it.

                  I am being held hostage in a giant insane asylum called Earth.

                  Comment

                  • #24
                    MarikinaMan
                    Veteran Member
                    • Nov 2015
                    • 4864

                    The rings may be perfect, but is the receiver perfect as well?

                    Ive lapped a few rings. Sometimes, its barely needed and others, I was glad I did.

                    Just another step in seeking perfection.

                    Comment

                    • #25
                      Matt P
                      Veteran Member
                      • Jun 2006
                      • 3101

                      Okay, So I set my rings on my bases and I leave them slightly loose.
                      Next I place glass in lower halves and attach upper halves.
                      I snug those up but not final tight. I am also making sure the rings are forward on the rail/base.
                      Since I have my ring bottoms where they need to go I next tighten those in place while insuring they stay forward.
                      So the tube aligns the bottom ring halves with its body.
                      Oh, typically I use rubber contact cement to help eliminate shift. Just as insurance... I have had tubes slip under recoil.

                      So lapping would get rid of the need to do what part of that?
                      My WTB of Anything Glock 1-2 Generation, Tupperware, Manuals or Parts. Press Me

                      Comment

                      • #26
                        Divernhunter
                        Calguns Addict
                        • May 2010
                        • 8753

                        Could get rid of the glue and also slipping.
                        If you lapped the rings you may see that only a small part of them has max contact with the scope. I was surprised on more than a few sets I have lapped just how little of then started out with full pressure contact. That is why I now lap all sets of rings. Those that say a top of the line set would not benefit from lapping I ask if you did not do it just how can you know? My expensive and top of the line rings did show a difference in full pressure contact area after lapping. One set quite a bit.

                        But you are free to do as you like. It is your rings/scope.
                        A 30cal will reach out and touch them. A 50cal will kick their butt.
                        NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
                        SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

                        Comment

                        Working...
                        UA-8071174-1