Need help on a mount for my scope.

[Ochoboy$9]

Hey guys I'm looking for a mount to attach a night force atacr f1 5x25x56 to a Barrett m99 what is the best product to use? Part numbers or links to sites would be greatly appreciated. Thanks guys/gals!

[JMP]

I'd get this one:

http://www.eurooptic.com/era-tac-adjustable-inclination-mount-34mm-47mm-185-high.aspx

Normally, I'd suggest the AI 5656 mount for an inexpensive mount for long range shooting, but your M99 probably has a funny tilt already built into the rail so the adjustable inclination will let you get the most elevation from your scope. Then, get a high mount since you may need rail clearance, and since you probably won't be shooting anything close in a BMG variant, extra scope height can actually be advantageous as it reduces the likelihood up picking up mirage from the barrel.

If you aren't planning on maxing out your distance, you can save money by just getting a set of 34mm "high" rings from any of the reputable makers like Badger Ordinance.

[KillZone45]

Spuhr

[Ochoboy$9]

Ok both of these look pretty good. I'm new to this league of rifle & scope so if anyone has any other input I'd be great full.

[Hairball]

I run a a 20 MOA SPUHR on my M99. As has already been mentioned, depends on what you are doing with the M99. I don't know your location so I am not sure if you are running a 50 or 416. As you know, the rifle comes with a 27 MOA rail so you may or may not need more.

[Interstateguns]

I've used the SPUHR and NF Unimount on those rifles.

Pick your poison.

If you want MOA in the system:

http://www.sportoptics.com/nightforce-scope-mounts-A257.aspx

http://www.sportoptics.com/SP4602.aspx

If not:

http://www.sportoptics.com/spuhr-scope-mount-sp4002.aspx

http://www.sportoptics.com/nightforce-scope-rings-A227.aspx

You have 120 moa in the scope so I don't think a 20moa mounting system would have an adverse affect on your ability to zero at 100 yards if that is what you plan on doing.

[CSTactical]

GDI, Nightforce Uni-Mount, DTA and more.

If we can be of help let me know.