Peg board install/replacement inside door?

[im2311]

Has anybody replaced their panel inside of their safe door with peg board? I like the idea and could definitely use the space.

My safe has attached/sewn pouches installed on the board already.

How do you take the panel off? Should I bother to do it?

Thanks

[9mmContagion]

Pictures would help... but it’s usually just screws with caps holding the fire board on

[Cuda440]

My door panel just lifts up an inch and pull the bottom out towards you.

Keep in mind that most doors are hollow and that panel is the main heat/fireproofing for the front of the safe. A pegboard would likely catch on fire just from nearby heat if the front of the safe was subject to a house fire

[im2311]

My door panel just lifts up an inch and pull the bottom out towards you.

Keep in mind that most doors are hollow and that panel is the main heat/fireproofing for the front of the safe. A pegboard would likely catch on fire just from nearby heat if the front of the safe was subject to a house fire

[JohnFLand]

Steel pegboard is a thing.

[im2311]

Steel pegboard is a thing.

At 1/4" thick though?

[Old Marine]

There's a company that makes a velcro overlay. Many different poivhes. Rtc.

I will try to find the link. Plus the guy is a Veteran.

More expensive but not as flammable.

[Old Marine]

Check these guys

https://wildecustomgear.com/

[Whiterabbit]

[im2311]

I'm trying to add a pic and it won't load.

My safe is a cannon valley forge 64 gun.

The door has pouches sewn into the fabric that is stapled to the board.