Tweet
A brief look at two Lee Enfield No. 4 Mk1* rifles. Not pristine examples, but these rifles are in good condition and one shows
indications of repairs at a particular British Army base during its service life.
Long Branch Lee Enfield No. 4 MK 1*:
A sure sign of British custody for this Canadian built Lee Enfield No. 4 Mk1* rifle, the British Broad Arrow mark on the receiver. Canada had its own agreement to supply arms to Britain during WW2.
Looking at the photos above, some research, observations and conclusions about this Long Branch rifle.
The color of the front stock and butt stock pieces are different. I think this is do to each piece being different wood...birch and walnut.
I've read the "WLH/4/52" marking on the stock is from a British Army base maintenance, the Bovington Camp British Army Armoured Fighting Training Group in Dorset England. Therefore, the present stock pieces on this rifle may have been part of a base rifle repair.
Sometime, a little research can give you bits of obscure information. The "CCM" marking on the stock's front nose cap is a marking for the manufacturer "Canada Cycle & Motor Co., LTD". On the top of the brass butt plate there is a "L" stamped over a code "M/216"...the code stands for Sanbra LTD, a Birmingham England brass maker.
There are "B" within L" marks stamped on various parts like the safety lever. This is a Long Branch factory identification for the part.
I also think the milled steel Mark 1 ladder style rear sight on the rifle was a replacement made in England. My understanding is that 1942 Long Branch No 4 Mk1* rifles out of the factory from Canada had a flip up two position 300/600-yard rear peep sight (designated the Mark 2) because there were not enough Mark 1 milled sights available. Later, during 1943 and afterwards, the flip up peep sights were replaced when the Mark 3 stamped steel rear ladder sight was introduced and became available; and also, post-war, the milled Mark 1 rear sights were used as replacements.
The rifle has matching serial numbers on the receiver butt stock socket, stock fore-end, bolt handle and magazine bottom.
Long Branch also made the Lee Enfield No4 Mark II spike bayonet which makes a good complement for any collector's Long Branch Lee Enfield No4 Mk1* rifle.
Savage Lee Enfield No. 4 Mk1*:
Looking at the photos above, some observations and comments about this Savage rifle.
A squared "S" identifies Savage made parts. You'll also see Flame and Shell ordnance acceptance marks, just like one sees on U.S rifles.
The Savage Lee Enfield No 4 Mk1* rifles were made for the WW2 "Lend Lease Act" as military aid and are roll marked on the left side of the receiver "U.S. Property".
There is a British Broad Arrow stamped on the right side of the receiver near the bolt handle. Also, the top of the receiver is stamped with a Broad Arrow within a "U" which is a South African military acceptance mark. I think this rifle was first "lent" to England; and later, under British custody, distributed to South African forces.
Like the Long Branch rifle above, the milled steel Mark 1 ladder style rear sight maybe an overseas replacement for the factory Mark 2 300/600-yard two position flip peep sight used by Canadian and American Lee Enfield No 4 Mk1* manufacturers during 1942.
There is a large "S" stamped on the top of the wood stock. I think this is the stock size marking and not a Savage manufacture mark.
Instead of the brass found on British made Lee Enfield No 4 Mk1 rifles, the butt stock plate on this rifle is made of a zinc alloy called "Zamak".
The serial numbers on this rifle where observed all match. Except for one shallow dent and one gouge, the stock is solid with its fit to the receiver and uniformly finished.
The spike bayonet in the rifle photograph is also Savage manufacture.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
indications of repairs at a particular British Army base during its service life.
Long Branch Lee Enfield No. 4 MK 1*:
A sure sign of British custody for this Canadian built Lee Enfield No. 4 Mk1* rifle, the British Broad Arrow mark on the receiver. Canada had its own agreement to supply arms to Britain during WW2.
Looking at the photos above, some research, observations and conclusions about this Long Branch rifle.
The color of the front stock and butt stock pieces are different. I think this is do to each piece being different wood...birch and walnut.
I've read the "WLH/4/52" marking on the stock is from a British Army base maintenance, the Bovington Camp British Army Armoured Fighting Training Group in Dorset England. Therefore, the present stock pieces on this rifle may have been part of a base rifle repair.
Sometime, a little research can give you bits of obscure information. The "CCM" marking on the stock's front nose cap is a marking for the manufacturer "Canada Cycle & Motor Co., LTD". On the top of the brass butt plate there is a "L" stamped over a code "M/216"...the code stands for Sanbra LTD, a Birmingham England brass maker.
There are "B" within L" marks stamped on various parts like the safety lever. This is a Long Branch factory identification for the part.
I also think the milled steel Mark 1 ladder style rear sight on the rifle was a replacement made in England. My understanding is that 1942 Long Branch No 4 Mk1* rifles out of the factory from Canada had a flip up two position 300/600-yard rear peep sight (designated the Mark 2) because there were not enough Mark 1 milled sights available. Later, during 1943 and afterwards, the flip up peep sights were replaced when the Mark 3 stamped steel rear ladder sight was introduced and became available; and also, post-war, the milled Mark 1 rear sights were used as replacements.
The rifle has matching serial numbers on the receiver butt stock socket, stock fore-end, bolt handle and magazine bottom.
Long Branch also made the Lee Enfield No4 Mark II spike bayonet which makes a good complement for any collector's Long Branch Lee Enfield No4 Mk1* rifle.
Savage Lee Enfield No. 4 Mk1*:
Looking at the photos above, some observations and comments about this Savage rifle.
A squared "S" identifies Savage made parts. You'll also see Flame and Shell ordnance acceptance marks, just like one sees on U.S rifles.
The Savage Lee Enfield No 4 Mk1* rifles were made for the WW2 "Lend Lease Act" as military aid and are roll marked on the left side of the receiver "U.S. Property".
There is a British Broad Arrow stamped on the right side of the receiver near the bolt handle. Also, the top of the receiver is stamped with a Broad Arrow within a "U" which is a South African military acceptance mark. I think this rifle was first "lent" to England; and later, under British custody, distributed to South African forces.
Like the Long Branch rifle above, the milled steel Mark 1 ladder style rear sight maybe an overseas replacement for the factory Mark 2 300/600-yard two position flip peep sight used by Canadian and American Lee Enfield No 4 Mk1* manufacturers during 1942.
There is a large "S" stamped on the top of the wood stock. I think this is the stock size marking and not a Savage manufacture mark.
Instead of the brass found on British made Lee Enfield No 4 Mk1 rifles, the butt stock plate on this rifle is made of a zinc alloy called "Zamak".
The serial numbers on this rifle where observed all match. Except for one shallow dent and one gouge, the stock is solid with its fit to the receiver and uniformly finished.
The spike bayonet in the rifle photograph is also Savage manufacture.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Comment