Originally posted by ljdouglas
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Austrian Steyr’ M95/34’
Collapse
X
-
I think the ammo I ordered is packed in clips -
Straight-pull bolts are fun. Check out the K31 rifles for a great example. Also check out the Ross rifles.
City Arms has one of those M95s sitting around.sigpicNRA MemberOriginally posted by Deadbolt"We're here to take your land for your safety"
"My Safety?" *click* "There, that was my safety"Comment
-
I just got mine back from ades gunsmith for headspace check and an overall bill of health. he said several times to take the bolt down.. not all that hard but these instructions hellped a lot..I used carb cleaner then clp and then a dab of grease in the mateing surfaces.. I am still cleaning the boar. I do not have a 8 mm hag but my 9mm jag fits real snug...eeek is my barrel shot out? there appeares to be pleanty of lands and groovs and dirt... it is getting shinney
Comment
-
then shuld I leave it dirty to go bore hunting?Originally posted by SemiAutoSamAhhh but boar's dont like to be clean they love to roll in the MUD.Comment
-
so you leave the endtrails and hide on the boar when you eat it?Originally posted by SemiAutoSamClean your BORE not your Boar.
great example of sidetracking a perfactly usfull thread... anyone seen oshmily?Comment
-
so how about it if I can fit a 9mm jag through.. is the barrel gone?Originally posted by five.five-sixI just got mine back from ades gunsmith for headspace check and an overall bill of health. he said several times to take the bolt down.. not all that hard but these instructions hellped a lot..I used carb cleaner then clp and then a dab of grease in the mateing surfaces.. I am still cleaning the boar. I do not have a 8 mm hag but my 9mm jag fits real snug...eeek is my barrel shot out? there appeares to be pleanty of lands and groovs and dirt... it is getting shinney
Comment
-
I'd be worried if the 9mm jag DIDN'T fit real snug.Originally posted by five.five-sixI do not have a 8 mm hag but my 9mm jag fits real snug...eeek is my barrel shot out?
How's an 8mm bullet fit at the muzzle end?sigpicNRA MemberOriginally posted by Deadbolt"We're here to take your land for your safety"
"My Safety?" *click* "There, that was my safety"Comment
-
Yeah, but it's only slightly bigger than 8x57 (which is properly 7.92x57.)
Mauser's 8 dials in at .323.. or is it .318? - this is .329. Not a whole lot of difference.sigpicNRA MemberOriginally posted by Deadbolt"We're here to take your land for your safety"
"My Safety?" *click* "There, that was my safety"Comment
-
it was prety darn snug.. like if you use 2 patches on a correct sized jag. my heavy patches would not go through, just the strechy ones wouldComment
-
Originally posted by Amendment IIYes, you are correct on both counts about the ammo.
You want the 8x56R for that rifle.
but is ammo it takes?
8x56 Ammo 250Rd Tin (not nazi marked) 250 Rd Tin $47.95
View Nice, clean WWII Era ammo packed in 250Rd cans, 10Rd wax paper packs.
#AMO-8X56250 at sog international
or do I need to buy a k98 to shoot it
Comment
-
Yes, that stuff is also for your M95, but I don't think the ammo is on clips like the Nazi marked stuff is.__________________
"Knowledge is power... For REAL!" - Jack AustinComment
-
I can not wait to shoot it. it is a much better built weapon than my mosenComment
-
holly crap that thing kicks like a mule! serously, I plink with a .300 win-mag and that thing kicked my ars. first squeeze busted my lip right open. I was bleading like a stuck pig and I will be dambed if the 2nd round didn't do the same thing. well you just got to get back up on that horse and I think I figured it out, hold the stock high in your sholder. that seemed to work because ofer the next 100 rounds I only busted my lip 5-6 more timesComment
Calguns.net Statistics
Collapse
Topics: 1,862,319
Posts: 25,091,966
Members: 355,415
Active Members: 4,718
Welcome to our newest member, scentedtrunk.
What's Going On
Collapse
There are currently 4785 users online. 92 members and 4693 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment