10 round 7.62mm stripper clip

[smle-man]

http://www.dsarms.com/p-11985-10-round-stripper-clip-308762-nato-also-for-g1-steel.aspx

2A1 and #4 7.62mm Lee Enfield owners should check out these 10 round 7.62 stripper clips. I bought 10 of them and they work great in my 7.62 Lee Enfields. The rounds strip easily into the magazine and you will get a full magazine in one long push.



I'm going to order another 10 for myself.

Happy shooting!

[Crunch130]

Possibly SKS stripper clips? 7.62X39 at the cartridge base is only about .025-inch smaller than a .308 Win case.

Crunch

[TMB 1]

Cool! I've been using these http://www.e-sarcoinc.com/stripperclipm14.aspx

[smle-man]

Possibly SKS stripper clips? 7.62X39 at the cartridge base is only about .025-inch smaller than a .308 Win case.

Crunch

They fit perfectly for a .308 case head.

[fal_762x51]

I have some and never thought of using them in my 2a. Thanks.

[Syntax Error]

Looks like the same that is made by NcStar over at Amazon: http://www.amazon.com/Caliber-Stripp.../dp/B0029DAYZM

I use a bunch of these clips for storing ammo and to use in magazine loaders and my M14. However, it's kinda difficult to use in the M14 since the alignment of the clip and the nose of the round collides with the front of the magazine, so it's difficult to strip. I don't get this issue when I use five rounder clips, though. Works well in my FALs with magazine loaders.

[echo1]

I've got a bunch of '70s Indian bandoleers with strippers and a few US surp 5 round strippers. They both work good, PAX