Mosin conversion chamber .32

[SanDiegoMan]

These .32 conversion chamber insert are an interesting idea. Is the bore of .32 bullets close to 7.62x54? I want to make sure this doesn't damage the barrel. Main reason this is an advantage to me is most of my local ranges don't allow steel ammo, the one that does is kinda far away.

[montana]

Never heard of these but tagged to see what the responses are. Sounds like a good idea.

[SanDiegoMan]

heres an example. Usually they are not this expensive

http://www.ebay.com/itm/Mosin-Nagant-Rifle-Chamber-Insert-from-7-62x54R-to-32-ACP-FREE-SHIPPING-/261428766507?pt=LH_DefaultDomain_0&hash=item3cde5e672b

[montana]

heres an example. Usually they are not this expensive

http://www.ebay.com/itm/Mosin-Nagant...item3cde5e672b

Pretty cool, hell 29 bucks isnt all that bad in and of itself.

[lowdive]

https://www.youtube.com/watch?v=nK-gf73-Dnk

https://www.youtube.com/watch?v=ZNFDDrPoRsU

seems to work and .32 isn't much bigger in diameter than the 7.62. might be a good idea to slug your bore to be sure it won't be an issue.

[skywarp1978]

Sportsmansguide has them

http://www.sportsmansguide.com/net/cb/762x54r-to-32-cal-multi-chamber-insert.aspx?a=587989

http://www.sportsmansguide.com/net/cb/762-x-25-rifle-chamber-insert.aspx?a=650814

[Noonanda]

They are good to go. There are a few different versions out there, I have one that allows me to shoot .32 S&W long and .32 H&R mag in both a mosin and my enfields. I used to have one that allowed .32 ACP but I may have gotten rid of it

[SanDiegoMan]

http://www.sportsmansguide.com/net/cb/cb.aspx?a=587989

BTW there's also a conversion for 7.62x25. I'm prob going 32 since I just want a plinking round I can use at local ranges.

[mosinnagantm9130]

I've got one of the .32 conversions for my L-E...

.32 H&R mag is a ***** to get the spent casing out of the conversion case. .32 acp just falls right out so I usually stick with that.

[DennisCA]

Question - Works with ANY Mosin (That is fires 7.62X54r)?

[mosinnagantm9130]

Question - Works with ANY Mosin (That is fires 7.62X54r)?

It should. Course, I haven't seen anyone try one in the Finns with a .308 bore diameter so I can't comment there.