Remington Model 6

[fga4]

Hi,
I am sorry to start a new thread but searched the archives in C&R and Rimfire and did not see postings for the Remington Model 6. I have several Remington rollers which are similar but this Model 6 falling block needs a full disassemble and unlike the other models the innards hidden inside the sideplate need to be punched out and I am not sure how to do it to make sure I can easily put the the parts back together. I found an exploded view of the parts but not enough information to do it. Any help would be appreciated.
Thanks

[TRAP55]

Model 6, or Model 6 Improved?

http://www.rollingblockparts.com/no-6.html

[fga4]

Regular 6. Thanks for adding Mr. Womack's link. He has saved my butt several times with parts. I forgot about his parts diagram and it reminded me to look for a decent diagram. Rifle was part of a auction with a model 4 and model 6. I mainly wanted the model 4.

I found a diagram and pulled the 2 main pins and from there it was easy to clean. Reassembly was a pain but thank heaven for little girls. Daughter slipped the hammer pin in while I pushed down on the hammer. Now its her rifle.

On an aside the receiver block was 12 shades of cold bluing so I used 000 steel wool and Mineral Spirits to clean it all off and tried to reblue and gave up. Realized it looks fine as is. Thanks again!

[gunboat]

Looks pretty nice --
How is the #4?
I do not want to appear condescending, but may I remind you to use some sort of safety glass for the young'un --
These old 22's are often spitters --

[edgerly779]

Why did you touch the patina on the receiver? Anytime you use steel wool and clean a receiver you screw up the antique value and the true feel of the c&r. I have a couple and would never try that. I see people do this all the time and turn a 400 firearm into a 200 dollar firearm. Why don't you paint it camo now and make it yuppie cool.

[highpower]

Why did you touch the patina on the receiver? Anytime you use steel wool and clean a receiver you screw up the antique value and the true feel of the c&r. I have a couple and would never try that. I see people do this all the time and turn a 400 firearm into a 200 dollar firearm. Why don't you paint it camo now and make it yuppie cool.

He said:

the receiver block was 12 shades of cold bluing

I think that I too, would have taken that crap off. I believe that the receivers were case hardened on those. When it ages it gets a silvery look to it.

[TRAP55]

Do it justice, bubba killed the value, so make it a nice heirloom and rust blue it. Bob is a great guy to deal with, and answers all your questions about prep work and the color of blue you want.

http://www.rustblue.com/

[gunboat]

mr edgerly
perhaps it would be nicer if you just suffered in silence --