1924 Mann Fritz 7.65 Pistol Project

[Spaffo]

It's still in jail. I'm going to have fun? reassembling this pistol.
Too bad someone chrome-plated it, but I only paid $85. 75.+10.PPT.
If anyone has assembly instructions, I could use the help. Not much online.c

[Spaffo]

Here's an ad showing it assembled.

[E Michael]

Check https://numrich.parts/

[MyOdessa]

The Mann 7.65mm Pistol

Field Stripping the Mann Pistol:

Remove magazine by placing safety lever to the magazine position.
Pull slide back while holding safety lever down to lock slide back.
Rotate barrel two full turns counter-clockwise.
Pull slide back to release lock then push it forward.
Lift the muzzle end up off frame.

[Hardwarejunkie]

Cool purchase OP!
It looks similar in size to my .25acp Hope pistol and then I re-read the caliber.

[God Bless America]

Haha how did you do the safe handling demonstration?

[BrunRox]

Haha how did you do the safe handling demonstration?

It's still in Jail..

Yup OP.., you're going to have fun re-assembling .

[AJAX22]

I have one of the early models that are less conventional

Machine work is nice

[Spaffo]

I need an exploded view or picture of trigger and mag spring assembly. Having trouble with the assembly order and flat spring position.

[Spaffo]

Still trying to put this pistol's bottom half together. If anyone has one of these and could take some photos of the assembled sear, trigger, and safety groups. I would sure appreciate it.
I think if I looked at one with the slide and firing pin off, I could figure out how to put everything back together.

[userformerlyknownasfitty]

Still trying to put this pistol's bottom half together. If anyone has one of these and could take some photos of the assembled sear, trigger, and safety groups. I would sure appreciate it.
I think if I looked at one with the slide and firing pin off, I could figure out how to put everything back together.

Try contacting the man who runs unblinkingeye.com. I think his name is Ed Buffaloe. Looks like he had an article on the pistol. I've reached out to him regarding MAB pistols and he replied in one day. The article on his site was written by someone else though. Maybe Ed is in contact with that person and can help you.

[Spaffo]

His website has been a big help with this and other pistols I have. I'll try contacting him. Thanks