K31 and K11 EAS front sight

[Latigo]

The EAS (Elevation Adjustable Sight) from Swiss Products will be available with the target side threaded to accept the Eagle Eye 1.5 front lens by the end of next week.
Eagle Eye 1.5x magnification lens (multi-coated)The Eagle Eye, or Adler Auge 1.5 Lens is meant to screw into the target side (front side) of your Diopter's front tunnel sight, opposite the Aperture Insert. This is a low magnification Lens that will make the visibility of the target itself more prominent appearing in your Iris.
Works extremely well for both young and older eyes. M.18 with 16mm lens diameter.

If you use the Aperture kit, you can remove your front sight blade and using the Post Aperture, the EAS will adjust to the same height as the blade was. Gives the shooter a much better target picture.

[kouye]

Thank's for the update. I'll be calling on Thursday to make sure my order is updated as I have the EAS as well as the Eagle Eye on order this week.

Any chance the front can also be threaded, like the K31 front sight, so a variable iris can be used too?

[Latigo]

The shooter side is already threaded for the Adjustable Aperture. ALL of our front sights are threaded for that very cool unit.
This one is mine.



P

[kouye]

Cool!