Help with Pedersoli Screw Barrel Pistol

[AlienHobo]

I am hoping someone can help me out. I'm feeling kinda dumb...

A few years ago, I bought a Pedersoli Screw Barrel Pistol Kit like this one:

https://www.dixiegunworks.com/index/page/product/product_id/8502/category_id/327/category_chain/312,325,327/product_name/PH0545+Pedersoli+Screw+Barrel+Pistol+Kit

I took it completely apart (all pins, screws and springs) and put everything in a plastic ziplock bag.

Well, I decided to put it back together and finish it up, but I cannot figure out how to reassemble the inner parts. I think I have all the parts, but I just can't get everything in the right place and make it work.

Do any of you guys have one that you can partially take apart and snap a picture of what it looks like on the inside? I just need to see how the springs and trigger parts go together.

Thank you for any help you can give.

[Darto]

http://www.muzzleloadingforum.com/

Someone there will help if you post pictures and ask nicely.

[Tom-ADC]

Might be somewhere here if you scroll thru it:

http://www.cybercyde.co.uk/images/boxlock.pdf

[AlienHobo]

Might be somewhere here if you scroll thru it:

http://www.cybercyde.co.uk/images/boxlock.pdf

I scanned through it and found one that was similar, but the internals were completely different. However, I might be able to figure it out by using these pictures and descriptions on how the trigger and hammer interact.

Thank you very much for the link.

[AlienHobo]

http://www.muzzleloadingforum.com/

Someone there will help if you post pictures and ask nicely.

Thanks! I'll check it out.