Free Guide to Building a Gew. 88 Extractor

[CASEC]

I posted it at

https://www.commissionrifle.com

Hopefully it helps someone out!

[GunKraut]

Thanks, great article.

[Enfield47]

Nicely done. I don't have a Mauser but enjoyed reading through it for the ingenuity.

[Springfield45]

Good job. And good right up. I made a couple for mine out of metal stock from scratch. Hand files and a drimel did not do a bad job. I all so made my own ejectors.

[CASEC]

Good job. And good right up. I made a couple for mine out of metal stock from scratch. Hand files and a drimel did not do a bad job. I all so made my own ejectors.

You should do an Ebook on both. The ejector instructions are badly needed, and the Vuegiro extractors will dry up. People want me to do a run of extractors and ejectors. I might but it's a huge pain in the ***, and not a money maker at all. It would be helpful if people could have a set of instructions showing how to make them from scratch.

[Springfield45]

I bought my first ones from Swede Nelson of Parallax Bill's fame. They had lots of info on all things 1888 Commission Rifles. Let me see if I can find the original write ups they had.