"Mcace" Chamber Inserts

[Spectre1995]

I've been doing some reading on converting my Arisaka Type 99 to fire alternate calibers other than its original chambering, 7.7x58. I came across Mcace and the chamber adapters for 7.62x39.

Has anyone ever used these before? Accuracy is no big deal, I just want to shoot my rifle and be able to keep it in its original condition (no permanent modifications).

[emcon5]

No, but there is always this: https://www.grafs.com/retail/catalog...roductId/12653

[Spectre1995]

I don't have a reloading setup

[Grumpyoldretiredcop]

The chamber insert idea has been used on a number of firearms. The one most folks know about is the one used to adapt .30-06 Garands to fire 7.62X51 ammunition. They do have one Achilles' heel; the insert can be extracted from the chamber with a fired case. If not observant, the next round the shooter chambers can give them a big surprise.

Example on point for your rifle in a thread on the Surplus Rifle forum. Click here for the thread.

[6mmintl]

I don't have a reloading setup

If you going to own/shoot C & R's you have to reload unless you were born with a silver spoon in your mouth.

Cast bullets are the easiest way to start out at low cost, equipment and components.

[CPRAFAN]

Have used their adapter to convert a .308 to 7.62x39 - so far, no problems. Ran about $20 for the insert.

[Enfield47]

You can get set up with a reloading press and components for not too much money. It's so worth it to reload, especially for the oddball calibers. Grafs has Prvi brass in stock for $57.99/100 and bullets can be reasonable too.

[Spectre1995]

What's a good reloading setup to start with for a beginner? Something inexpensive but still good

[Armistice]

What's a good reloading setup to start with for a beginner? Something inexpensive but still good

Check out the Lee Classic single stage press kit. The kit will also have powder measure and scale and case lube and such. I can't remember the price but it's def not bad. I have it set up on a Harbor Freight bench grinder stand in my apt. It takes up about 1.5 sqft of space. If you are serious about reloading, you can always upgrade to more expensive brands, but for a beginner, I'd say go with Lee

Here's the link. This is the setup I have. Def worth it

http://www.amazon.com/Lee-Precision-Breech-Lock-Challenger/dp/B003ISVWC6/ref=sr_1_1?ie=UTF8&qid=1423941391&sr=8-1&keywords=lee+breech+lock+kit

[Enfield47]

I agree that the Lee presses are a good value. I have the classic cast turret press which uses turrets so you can keep each set of dies set up in their own turret. Swapping calibers takes seconds by simply swapping out the turret head. I use mine for pistol calibers and rifle calibers up to .30-06 (by removing the auto indexing rod) without any issues. You could also go with a single stage press. They are known for being strong and easy to use for a beginner (the turret press is easy to use too). Either type of press will serve your needs well and probably outlast you.

Here are a couple of Lee presses to consider.

Lee Classic Cast Turret Press

Lee Classic Cast Breech Lock Press

[Spectre1995]

I'll look into the Lee, I've got to sell some stuff first before I even consider finding the space for it, though

[Enfield47]

The reloading clubs in LA and OC are also a great place to try before you buy. You'll get to try several different presses so you can decide what you like or don't like about each one. They teach you with hands on experience and show you how to safely reload. It's worth the investment and the knowledge you'll gain can't be matched anywhere else. Check out the Ammo and Reloading section, the classes are offered every 3 or so months.