...

[UN3178]

...

[kozumasbullitt]

Do it yourself. I just did 2 last night and they are easy to do. All you need is the nut wrench and a rail vise. If you don't want to invest in tools, you could send it to Adco. KAC is not CA friendly so I would avoid them directly. I figure with the cost of shipping, insurance and the install charge ($75-$100) you will be close to the cost of the tools. The YHM rail vise works fantastic and can be had for $60-$70 and the KAC barrel nut wrench can be found used for under $100. I prefer to have my own tools so I can service my own rifles.

[badfish71]

Ar15barrels.com

[johnyreb]

+1 for do it yourself, the tools are not that expensive....and you can remove it yourself later on with out having to send it out.

[kalieracer]

+1 for AR15Barrels.

[ar15barrels]

I figure with the cost of shipping, insurance and the install charge ($75-$100) you will be close to the cost of the tools.

I charge $25 to assemble an upper from a box of parts or $40 to tear down and rebuild an upper which covers all component swaps that don't require machining.
I do KAC URX's for the same price as any other parts.

[kozumasbullitt]

I charge $25 to assemble an upper from a box of parts or $40 to tear down and rebuild an upper which covers all component swaps that don't require machining.
I do KAC URX's for the same price as any other parts.

That is a hell of a deal!