Unconfigured Ad Widget

Collapse

Problem with Ceiner .22 kit?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Standard
    Veteran Member
    • Sep 2007
    • 3657

    Problem with Ceiner .22 kit?

    I got my Ceiner kit in the mail a couple of days ago, but haven't had a chance to shoot it yet...But I installed and lubed the kit and loaded the little mag that it comes with. I tried cycling the rounds through. The first one loaded fine - When pulling the charging handle to eject the (unfired obviously) first round and cycle a new round, the first round gets stuck on the next round on its way out and I have to separate the upper and lower to pull the 1st round out.
    It's like the placement of the round in the magazine isn't letting the first round eject.
    Like I said, I haven't fired it yet, so maybe it's just a problem that will correct itself?
    It seems like the round in the magazine is almost sticking up too high or something.
    I appreciate any help!
  • #2
    ar15barrels
    I need a LIFE!!
    • Jan 2006
    • 56967

    Ejection timing of a fired case sans bullet is quite different from a loaded case.

    What are you doing checking function in your house with live ammo?
    Randall Rausch

    AR work: www.ar15barrels.com
    Bolt actions: www.700barrels.com
    Foreign Semi Autos: www.akbarrels.com
    Barrel, sight and trigger work on most pistols and shotguns.
    Most work performed while-you-wait.

    Comment

    • #3
      Jack_Bauer
      Senior Member
      • Jan 2006
      • 534

      Originally posted by ar15barrels
      Ejection timing of a fired case sans bullet is quite different from a loaded case.

      What are you doing checking function in your house with live ammo?
      22 snap caps (or function checking caps) are a lot cheaper than the cost of repairing a hole in the wall or worse

      This is normal as ar15barrels stated. Function checking caps won't eject properly in my gsg-5 but has yet to experience a FTE at the range with thousands of rounds through the pipe.

      Comment

      • #4
        Standard
        Veteran Member
        • Sep 2007
        • 3657

        Ok, thanks for the info. I was function checking it outside, in a safe condition, of course.
        Glad to hear, can't wait to shoot it this weekend
        Where's a good place for mags for this thing? The mag that comes with the kit is pretty...sub par

        Comment

        • #5
          domokun
          Veteran Member
          • Apr 2008
          • 3525

          I've also experienced some snap caps that were slightly out of spec and thus refused to extract properly from the chamber when trying to cycle them through the firearm.
          "Can our form of government, our system of justice, survive if one can be denied a freedom because he might abuse it?" --Harlon Carter
          "A government big enough to give you everything you want is a government big enough to take from you everything you have." --Gerald Ford
          "Government is essentially the negation of liberty." --Ludwig von Mises
          "You cannot invade mainland United States. There would be a rifle behind each blade of grass." --Admiral Yamamoto
          USS Hornet ARC Member.

          sigpic
          Join today?

          Comment

          • #6
            xxINKxx
            Veteran Member
            • Jun 2008
            • 4289

            For mags go to addaxtactical.com or spikestactical.com...

            They both sell the 22mm 10/30 mags for the ar-15 22lr conversion
            "If a law is unjust, a man is not only right to disobey it, he is obligated to do so." - Thomas Jefferson

            Comment

            • #7
              Standard
              Veteran Member
              • Sep 2007
              • 3657

              Thanks for the info Ink.

              Comment

              • #8
                Silverfish
                Junior Member
                • Feb 2008
                • 54

                Where'd you get the kit from, I'm having a hell of a time finding one?

                Comment

                • #9
                  Standard
                  Veteran Member
                  • Sep 2007
                  • 3657

                  I got one when Midway had them in stock last week.

                  Comment

                  • #10
                    Standard
                    Veteran Member
                    • Sep 2007
                    • 3657

                    UPDATE - Took it to the range today. I had about 3-4 FTE's out of about 250 rounds. Shooting is fun as hell

                    Comment

                    Working...
                    UA-8071174-1