def

[newguy83]

def

[gunRfun]

Are you pressing on the detent pin while attempting to remove it?

[70 blazer]

heres from the site you posted Specifications


CALIBER
.30

LENGTH
2.10 (53.3 mm)

DIAMETER
.865 (22 mm)

THREAD PITCH
14x1 LH

WEIGHT
2.0 oz (56.6 g)

notice it says LH on thread pitch http://www.k-var.com/shop/SAM7R.html
FEATURES
100% new-production parts and components.
Bulgarian hot-die hammer forged receiver, bolt, bolt carrier, and double-hook trigger
Cold hammer-forged 16.3” barrel from Arsenal’s Bulgarian factory, built on Steyr manufacturing technology
Hard-chrome plated bore and chamber
Removable 4-port muzzle brake with 14x1mm left-hand threads.
AK scope rail.
Intermediate length US-made 10” trapdoor buttstock. (Total length of pull 13.4”.)
922(r) compliant with US or imported magazines.
Substantially extended service life over other types of assemblies.
SPECIFICATIONS

Caliber: 7.62 x 39 mm
Total Length: 927mm (36.5”)
Barrel Length: 415 mm
Weight without Magazine: 3.67kg (8 lbs.)
Muzzle Velocity: 710 m/s
Rate of Fire (practical): 40 rds/min
Twist Rate: 1 in 240 mm
Effective Range: 400 m
Max Effective Range: 1350 m
from manufacturer it says Lh too.

[The Paper Pimp]

a lot of those brakes are rusted in place. soak in WD 40 over night and try again tomorrow.

[newguy83]

Are you pressing on the detent pin while attempting to remove it?

Yes. It is actually stuck downward. I also mentioned this in my conversation with the woman from Arsenal and she assured me it would loosen up over time.

a lot of those brakes are rusted in place. soak in WD 40 over night and try again tomorrow.

Rusted? On a brand new gun? wtf

[The Paper Pimp]

yeah, rust. I have one too. there's a vid ok YouTube about it.

why do you want that comp? I have one on my AR.

[newguy83]

yeah, rust. I have one too. there's a vid ok YouTube about it.

why do you want that comp? I have one on my AR.

It got lots of good reviews. What is bad about it?

I have a Battlecomp 2.0 on my 5.56 and I dont like it so I figured Id try this.

[davidb]

is it new as in you just bought it, or was it actually recently made?

i have no experience with that particular rifle, but when i checked my recently purchased (bought this year still in factory box covered in factory grease) saiga's manufacture date it was 2005

[giulianoamato]

Thanks for sharing information,your information increase my knowledge.Your information very helpful for me.

[The Paper Pimp]

it's not a bad brake, just wondering why you wanted on your AK is all.

[peppermintman]

Machining oil outta do the job, or some other penetrating oil. I think wd40 will dry out and the machining oil will soak in good. Work good on frozen SKS front sites so if it works on a 50+yo rifle outta work on yours. Put some in there and wait over nite

[w210838]

You need to hit it with some good penetration oil,I would use some break free.be very liberal with it and let it soak if need be in the penetrating oil over night.clp will not cut the mustard.

[70 blazer]

PB Blast is the shiznick for bolts frozen and or rusty it penetrates and make rust turn to mush its good stuff I use it mainly for exhaust bolts on cars .

[zfields]

You need to hit it with some good penetration oil,I would use some break free.be very liberal with it and let it soak if need be in the penetrating oil over night.clp will not cut the mustard.

Always been a fan of Liquid Wrench. Few good taps with a ball peen hammer never hurt either!

[Father Ted]

Kroil