milled lower question

[Shoot-it]

How would a person register their rifle with a milled lower with out a serial number if the law pass's ?

[The Paper Pimp]

AFAIK, milled receivers have serial numbers--you're talking about an AK, right?

FYI, AKs don't have an upper and a lower like ARs.

[Shoot-it]

I mean the ones you mill your self from 80% lowers yes I know ar-15 and ar-10 have lowers.I just saw another question like mine.

[The Paper Pimp]

there are plenty of threads on the subject. try the search button

[sl0re10]

I mean the ones you mill your self from 80% lowers yes I know ar-15 and ar-10 have lowers.I just saw another question like mine.

If it is not finished; legally anyone can help with it. Find someone who can stamp or etch one in. You can make up the serial number. Search for a thread on the topic because you need some other info to go along with it put on it. Also; the depth has to be to a certain level and a thread on the subject should mention it.

Then you could register it.

If its done / not 80% check on the rules for that situation. I'm not sure what they are.

Also; if you get a metal stamping kit to do it yourself... try it on other stuff (wood or something) before your receiver... don't want to mess it up while you are learning how to use it.

[FresnoCNC]

View Atf website it explains legal requirements

[MrPlink]

AFAIK, milled receivers have serial numbers--you're talking about an AK, right?

FYI, AKs don't have an upper and a lower like ARs.

I can tell you are an expert machinist. . .

[Shoot-it]

there is no answer to this until after the new year .

[MrPlink]

Well actually the answer is simple you mark it yourself.
following the atf guide for size and depth you must include your name, city and state of manufacture and model and serial (up to you to name and number it)

[Howie44]

there are plenty of threads on the subject. try the search button

How about spending just as much time posting a link to be helpful instead of being a smart**s

[gun toting monkeyboy]

How about spending just as much time posting a link to be helpful instead of being a smart**s

^This^

We all know the search function on here sucks to the point of being almost unuseable. Quit being obnoxious and either post a link, or ignore the thread.

-Mb

[The Paper Pimp]

how about using the search function instead of being a dumb ***?

that's what the search button is for

[E Michael]

There is a search function?

[Flintlock Tom]

Well actually the answer is simple you mark it yourself.
following the atf guide for size and depth you must include your name, city and state of manufacture and model and serial (up to you to name and number it)

The ATF guides are federal requirements for firearms manufacturers. There are no federal marking specifications for home-made firearms (which are not being transferred). It is still unclear how CA DoJ will deal with firearms which do not require a serial number if SB374 is signed into law.

[The Paper Pimp]

Plink, I excel at pushing buttons.