Need some PTR advice

[nitroxdiver]

I paid $1100 for my PTR GI @ Turners on impulse a few weeeks ago.

I kinda wish the lower were metal not polymer, definitely wish it had a welded rail but they're ugly as hell and the UTG for $17 is supposedly really good, and the wide handguard is much nicer looking.

That said, I just think the rifles cool, but now I wish I had a FAL!

Metal clipped and pinned SEF lower Parked.
Currently sold out, but email to be put on the list.

http://www.robertrtg.com/g3steelsef.html

The parkerized one matches the GI park finish perfectly. You'll also need the safety selector lever made for the metal lower as it has a shorter shaft.

http://www.robertrtg.com/g3selectorlever.html

[huntingsocal]

thanks Nitro

I was thinking about one of these too http://www.hkparts.net/shop/pc/PWS-F...or-121p837.htm

Maybe I'll just get both

[johnny1290]

Thanks, Nitro!

[nitroxdiver]

thanks Nitro

I was thinking about one of these too http://www.hkparts.net/shop/pc/PWS-F...or-121p837.htm

Maybe I'll just get both

Haven't used the pws brake on a ptr, but on a scar they are great at directing recoil straight back and basically eliminating muzzle rise and twist.

The heavy buffer takes the harsh edge off the recoil impulse for sure. In fact with m80 ball I can shoot it as much as I want in just a t shirt with no pain or bruising. It really makes a big difference IMO and is a great bargain compared to the original HK oem heavy buffer. Again drop me a line if you have install questions and I'll talk you through it with a couple tricks. Grab some feeler gauges and measure your initial bolt gap and write it down. Here's a quick write up on measuring it and the specs you want. He states .012-.020 but the armorers manual actually lists a wider range. http://www.robertrtg.com/g3qa.html


Sent from classified location using Tapatalk.

[nitroxdiver]

Double tap

[nidhogg24]

pulled the trigger today on the A3R, thanks for the advice gents!

Now you just need to figure out what scope to put on it.