Bedding needed?

[n2fooz]

So, judging from these pictures it looks as though I should bed my B&C MedTac.



Thoughts?

[ar15barrels]

Done correctly, bedding never hurts.
There is no guarantee of if helping, but its not gonna hurt.
It often helps...

[6mmintl]

radius all corners/edges of recoil lug, rough up edges of stock around front receiver including recoil lug recess, wipe down stock and aluminum bedding block with acetone or brake cleaner.

Use boot polish or shoe polish and polish action and barrel, top and outside edge of stock around area to be bedded with a Q tip coat inside of front screw Ferrell (aluminum) and also coat front action screw.

make sure you use paper or cardboard shims to center barrel in barrel channel.

Use a good two part epoxy and bed front of action/recoil lug.

Clamp and let dry overnight, repeat on rear tang.