C products 10/20 mag group buy

[jjperl]

I'll take one, maybe two. I want one of the 10/30's as well...but I put that in the other thread.

When/if are they going to be available?

Not sure yet, but soon.

[vega]

So let me get this straight.

You are just buying $7 dollar magazines and punching tabs into them, then selling them for $20 each + $1.50(+/-) shipping + 3% for paypal ??

I'll pay you $10ea shipping included for 3 pcs if you can make it. I do not have paypal would postal money order work for you? Please post pics.

[Bimmer2]

I do not think they sell them. They are supposed to be making some 10/20s, but we have been waiting for months and only a handful of CA vendors will have them and C Products is not going to put them on their website.

They're listed on their website: http://www.cproductsllc.com/

Click on the "Magazines" target at the left.

Then click on "20 Round Straight Stainless Steel Magazine" at the left.

Then click on "Add One to Basket," and there's a pull down menu to have it blocked or lanced to 5 or 10 rounds.

They want $6 to block or lance, on top of the normal magazine's cost, so that's $12.95 + $6.00 = $18.95. Even with CProducts exorbidant shipping ($9.69, flat rate), they're a bargain, I think.

Also, Larry from CProducts has already said that they're selling them in the Industry forum on Arfcom.


I like the idea of a group buy (I said "I'm in" on the poll), but you've got to beat the regular price...

Ben

[jjperl]

Interesting, I'll see what I can do about lowering the group buy price by Monday.

[moulton]

Cproducts is already making these using straight mag bodies, itis currently on the way to the distributors.....you can pre-order at 44mag.com

[lakai]

I'll pay you $10ea shipping included for 3 pcs if you can make it. I do not have paypal would postal money order work for you? Please post pics.

um ok.. why don't I just give them to you for free. I'll even pay for shipping.

[lakai]

He might be. You certainly can buy the machinery it takes to do it yourself and do the same thing. It is called capitalism. Don't act so shocked.

I have tried bending the tabs on the SS models and it doesn't work. I never tried heating them first and might have to do that some day.

I am not sure about the aluminum models and would be interested in trying that as well.

Personally I am just a little leary of these custom magazine jobs out there. However, if C Products modifies them at the factory and says they are 10 rounders and JJPERL is a manufacturer in the same light, I guess it doesn't make a difference. When it comes down to it this entire magazine law is really quite unenforcable and full of holes.

Think about it, you can take a magazine extension for a Glock 26 and easily put it on the magazine and take it off. Does that mean it is permanent?

So what kind of followers are they going to have? Green or Magpul III?

Has anyone tried to cut a slit through the wide face of the mag and slip in a modified floorplate through it ? that would be better than just the tabs.
It's not that hard to modify these mags, since they're so cheap you can afford to mess around with them. I have some 1/4" pvc sintra board that I can cut to fill the mag up to 10rds but what for. Aren't these mags just for show if anything. going to the range with a OLL with and a 20/30 round mag brings too much negative attention in my eyes.

[ldivinag]

i'm in for 5... maybe 10, if the price drops...

[tenpercentfirearms]

They're listed on their website: http://www.cproductsllc.com/

Click on the "Magazines" target at the left.

Then click on "20 Round Straight Stainless Steel Magazine" at the left.

Then click on "Add One to Basket," and there's a pull down menu to have it blocked or lanced to 5 or 10 rounds.

They want $6 to block or lance, on top of the normal magazine's cost, so that's $12.95 + $6.00 = $18.95. Even with CProducts exorbidant shipping ($9.69, flat rate), they're a bargain, I think.

Also, Larry from CProducts has already said that they're selling them in the Industry forum on Arfcom.


I like the idea of a group buy (I said "I'm in" on the poll), but you've got to beat the regular price...

Ben

Sure enough. I see they aren't offering the 10/30s on the website, which he said he wouldn't, but it now appears they are doing the 10/20s.

Just be forewarned, he has been promising 10/20 and even 10/30 magazines for months now. And pre-ordering them is just as good as not getting one in my opinion. Until C Products actually gets it in gear and makes them and ships them, this group buy might not be a bad idea for those of you just itching to get a 10/20 straight body magazine.

Again, he has been promising these for months. Talk is cheap and product on the shelves is what matters.

[vega]

Has anyone tried to cut a slit through the wide face of the mag and slip in a modified floorplate through it ? that would be better than just the tabs.

You might be the first.

It's not that hard to modify these mags, since they're so cheap you can afford to mess around with them. I have some 1/4" pvc sintra board that I can cut to fill the mag up to 10rds but what for.

I believe that will be my 3 mags.

Aren't these mags just for show if anything. going to the range with a OLL with and a 20/30 round mag brings too much negative attention in my eyes.

For each his own, either you're in or out.

[Bimmer2]

Just be forewarned, he has been promising 10/20 and even 10/30 magazines for months now. And pre-ordering them is just as good as not getting one in my opinion. Until C Products actually gets it in gear and makes them and ships them, this group buy might not be a bad idea for those of you just itching to get a 10/20 straight body magazine.

Again, he has been promising these for months. Talk is cheap and product on the shelves is what matters.

Well, CProducts said a month ago that they're "in stock," but they hadn't shipping to distributors at that point. See: http://www.ar15.com/forums/topic.htm...f=216&t=159687

[jjperl]

Ok, here's an update:

I might be switching to C Products stainless steel strait body 10/20's, instead of the aluminum 10/20's. You won't have a choice between one or the other.

As of now, I hoping to set the price at less than $17 per mag.

Here's a pic of a SS 10/20:

[BDH]

I'm in for 3.
Thanks,
Bruce

[Darklyte27]

assuming that prices dont change 17$ and product doesnt change from the SS 10/20 put me down for 2

[PonchoTA]

Make it $17 each shipped, and I'm in for a few! Probably 4 or 5 at this point.

Pls let me know...

Cheers,
Paul