Help pinning the bushmaster ACR stock

[groundshark]

I'm trying to pin the folding stock per the instructions here:

Stock Block, Bushmaster ACR / KRISS Super V

However I can't get past step #2 which is "Remove the stock release button and spring".

How do I remove the folding button to get access to the spring?

[groundshark]

Anyone have any advice? Still trying to do this...

[alfred1222]

Remove the entire stock from the rifle, than fold it so that the spring and button mechanism is accessible. Pull that out, put the pin through the spring, and put it back together. If that doesn't work, YouTube it

[groundshark]

Remove the entire stock from the rifle, than fold it so that the spring and button mechanism is accessible. Pull that out, put the pin through the spring, and put it back together. If that doesn't work, YouTube it

How do I remove the button mechanism and spring? That's the part I'm stuck on, I've tried everything to try and get it out.

[alfred1222]

How do I remove the button mechanism and spring? That's the part I'm stuck on, I've tried everything to try and get it out.

Sh*t, I'll get home in an hour and look at it again

[groundshark]

There are pictures here in this thread if it helps...

http://www.calguns.net/calgunforum/showthread.php?t=456319

[groundshark]

Ok finally got it. Just had to use a thin enough screwdriver. Thanks all.

[NorCalOps]

So how do I un-pin one? ☺

Sent from my VS987 using Tapatalk