Tweet
...
-
Last edited by UN0027; 01-22-2017, 2:45 PM. -
grips are interchangeable. there are two different types of 308 ar mags, armalite pattern and dpms pattern. -
grips and stocks will interchange. free floating rails use the barrel nut to attach. DPMS and RRA are different. dont know about Armalite.
also if you have to buy a spring and buffer 308 are different.
are you referring to Armalite.
AR10-Armalite
LR-308-DPMS pattern
LAR-8-Rock River Arms
you almost have to look at the MFGs website to see what there rails fit.
wait for others to chime in before you buyBeen gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
I really miss the good old Pomona Gun Shows.
I'm Back.Comment
-
You need a dpms style rail that should have the proper barrelnut. You roils have top block your own 10/20 mag yes.Just a libertarian guy in a Leftist Authoritarian state.
Comment
-
The dpms free float rails come with the barrel nut. The rail attaches to it. It comes as a set.Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
I really miss the good old Pomona Gun Shows.
I'm Back.Comment
-
Riflegear has 10/20 PMAG's in stock.
You have to stick with mags that are designed for SR-25/LR-308 pattern rifles.
It is possible to run an AR-15 stock and receiver extension if you buy one of Slash's CAR-10 buffers.
Someone has already mentioned that the barrel nuts are different, so the handguards are not interchangeable.Comment
-
Yes it is.Just a libertarian guy in a Leftist Authoritarian state.
Comment
-
or you can get these mags
Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
I really miss the good old Pomona Gun Shows.
I'm Back.Comment
There are currently 3708 users online. 48 members and 3660 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.
Comment