Magpul Limiters

[Mac7504]

Hey Fellas,

I was searching for Magpul limiters for 20 and 30 round units, but I came across two types; anyone have experience with one or the other?

https://www.exilemachine.net/shop/magpul-pmag-10-rd-limiter-blk-3pk-2820.html

https://www.exilemachine.net/shop/magblock-magazine-block-10-20-pmag-989.html

Thanks

[2shotjoe]

I use the boxy one on the bottom, works great.

Sent from my DROID RAZR using Tapatalk

[Mac7504]

Does this replace the floorplate?

[0331Marine]

Does this replace the floorplate?

Not the plate, just the part on the spring.

Edit: I was wrong on the name of the part.

[n_saint]

I use them on all my P Mag Kits, does not replace the floor plate.

[0331Marine]

I use them on all my P Mag Kits, does not replace the floor plate.

Edit: Same as above.

[Mac7504]

On which kit quys? The block or the pointed ones (first)...

[0331Marine]

Here is the block one next to a 30 Pmag. Send me your address and I will send you a 10/30 block to see if you like it.

[Mac7504]

Here is the block one next to a 30 Pmag. Send me your address and I will send you a 10/30 block to see if you like it.

Awesome, thank you for the pics.

Really? Sending PM.

[gl0ckc0ma]

I cut out a plastic strip from an old DVD case about .5" wide to fit in the follower slot and length wise to fit only 10 rounds, slid the strip in the follower slot and epoxied the base plate and it works perfectly. I got the idea from Solartactical.com's limiter, all it is, is a strip of plastic.

[Mac7504]

I cut out a plastic strip from an old DVD case about .5" wide to fit in the follower slot and length wise to fit only 10 rounds, slid the strip in the follower slot and epoxied the base plate and it works perfectly. I got the idea from Solartactical.com's limiter, all it is, is a strip of plastic.

Thank you, but I use these out of state so I do not wish to epoxy them...

Also, they are only about 5 bucks a piece, so it's not terribly bad...

[gl0ckc0ma]

Thank you, but I use these out of state so I do not wish to epoxy them...

Also, they are only about 5 bucks a piece, so it's not terribly bad...

Even if you get the limtiers from a store, you would need to epoxy or rivet the base plate for it to be considered permanent and Cali legal.

[steve92407]

i bought 10 magblocks under the east side awning the last costamesa gun show for $40 cash.

[AKSOG]

Anybody make these for AK mags?

[Exile Machine]

We sell metric boatloads of each type, and have had no customer complaints about either, and zero returns. But the Magblocks are made by a California company and Calguns vendor, Magblock LLC. Great company to work with and a fantastic product. You can tell they put a lot of thought into the design so that a single block (the 10/30 PMAG unit) can be adapted to fit multiple types and sizes of mags simply by snapping off the unwanted portion. The machining of the mold tooling is excellent and it shows in the final product. They do have AK blocks and blocks for other guns as well, check their website at magazineblocks.com.

BTW we are offering FREE shipping on these this week so you can pick up 10 for $40 and you won't have to pay shipping, sales tax, or $8 entry fee to get into the gun show...