Aesenal AK trigger not resetting 100%?

[bighead]

Thanks for the input guys, ill post pics when I get home.

[Quickdraw Mcgraw]

BigH Putting a single hook g2 in my arsenal is the BEST thing I've ever done to the rifle...trigger pull went from 8+lbs to 3.5 with about 20 minutes worth of work...for me the issues with the AK are trigger(usially) and sights(always) so the G2 fixes the trigger problem for $35...now put some nice sights(peep or night) or red dot on there an see how she shoots!
have fun an be safe!

[bighead]

Here is the pics, my macro skills suck.I havent cleaned/touched the rifle since the trigger issue arised.Ill upoad some more with the hammer forward.

[bighead]

Hammer forward...

[cmace22]

Check to make sure your dissconnector has the spring in it. If the hammer isnt being captured when the trigger is pulled which is most likely the case when firing, the disco isnt catching the hammer. The only thing I can think of is its missing the spring.

There shouldn't be anywhere for the hammer to go except down and captured by the disco. Here is a photo of an Arsenal FCG.

[SJgunguy24]

Are you 100% sure it's not resetting? Sometimes the casting lines on the hammer and disconnecter need to be polished out. There can be too much friction and that can hold the hammer back.

[bighead]

@SJ

I'm positive it's not resetting.Trigger stays flat in a depressed position until I manually cycle a round through.