CMMG Inc. Uppers, any good?

[Cole125]

Gentlemen,

What is your opinion on CMMG AR 15 uppers and the company in general? I have a deal on a CMMG M4 .223 upper and I am conidering buying it for my next AR build.

Would I be better off spending more on a Stag or DD upper?

Just looking for some input.

[mlevans66]

In MY opinion CMMG are pretty good uppers. I also say Stag is about the same quality. If you can get a DD then get it. I hear they are pretty good also but if money is an issue then the CMMG is good to go. Check around on reviews of the CMMG.

[armtactical]

Adams Arms uppers very good quality.

[triplestack3]

Gentlemen,

What is your opinion on CMMG AR 15 uppers and the company in general? I have a deal on a CMMG M4 .223 upper and I am conidering buying it for my next AR build.

Would I be better off spending more on a Stag or DD upper?

Just looking for some input.

Good bang for buck, good customer service. I have 4 CMMG uppers LOL

*Edit: you can get them with 1/7 twist or 1/9... two of mine are 1/9

[sixzulu]

CMMG is good to go. I've had a CMMG upper AR for a couple years now and love it. Zero issues whatsoever. I'd gladly buy another.

Their barrels are rifled with a 1/7 twist, and I believe Stag is 1/9, so if that is of importance to you, it may be something to consider. Other than that I wouldn't pay any more for a basic M4 style upper.

+1 for customer service as well.

[donking]

CMMG is good.

[mrvash]

I currently have a CMMG complete upper (BCG, CH, Barrel, Upper etc..) and it has about 1,000+ rounds through it and literally no problems whatsoever. IMHO CMMG is good to go!

[HK416]

I like them

[shadow65]

My experience with CMMG has been outstanding.
If given a choice between a CNNG and a Daniel Defense for the same price, I would take the DD. Resale value would be better in my opinion.
Dave N

[javalos]

CMMG is military grade stuff, read their specs and you'll see that.

*certified 4150 chrome-moly vanadium steel
*5.56x45 NATO chamber
*1:7 twist
*Hard chrome lined chamber and bore
*M4 feed ramps
*11 degree recessed target crown
*F marked forged front sight base
*Parkerized Barrel including under the front sight base
*A2 Flash hider installed with Peel washer
*Forged A3 upper receivers are T marked and have extended feed ramp cuts *(M4 ramps)

They are now offering cold hammer forged barrels. = ))))

[gunsarefun]

I've been very pleased with my CMMG stuff, pretty much Stag, Spikes, CMMG, BCM.... are all on par with each other. Seems Noveske, DD, YHM, Larue, are more of the "high end" stuff, but for a premium price too.

I'm also very pleased with my new version CMMG 2 stage trigger.

[BajaJames83]

no problems with my cmmg..

[supersonic]

CMMG is military grade stuff, read their specs and you'll see that.

*certified 4150 chrome-moly vanadium steel
*5.56x45 NATO chamber
*1:7 twist
*Hard chrome lined chamber and bore
*M4 feed ramps
*11 degree recessed target crown
*F marked forged front sight base
*Parkerized Barrel including under the front sight base
*A2 Flash hider installed with Peel washer
*Forged A3 upper receivers are T marked and have extended feed ramp cuts *(M4 ramps)

They are now offering cold hammer forged barrels. = ))))

Not to nitpick, but FYI, "A3" uppers are the standard feed ramp, flat tops for rifle configurations; "A4" is the 'M4' - cut feed ramp forging (originally) designated for the actual 'M4' Carbine.

[Jerkdog]

I currently have a CMMG complete upper (BCG, CH, Barrel, Upper etc..) and it has about 1,000+ rounds through it and literally no problems whatsoever. IMHO CMMG is good to go!

+1. I don't quite have 1K thru mine, but it just runs and runs. A quick boresnake and she's all clean.

[MUKAK]

i have a 16 inch WASP 1-9 gas piston upper and its been great.. after 1000 rounds not a single FTF FTE

i really luv they GAS PISTON SETUP

it shoots any kind of ammo (WOLF Bear) with no problems

am happy with it