Tweet
Hey all,
Not sure if you remember, but I made a thread a great while back (3-4 months?) about which receiver set to pick- Mega or JD Machine. Anyway, I went with Mega Machine's MA-TEN, and I couldn't be happier. I have all the parts together and I've built the complete rifle without using a single DPMS part.
The upper was built, coated and spec'd out by kendog4570, a fellow calgunner. Everthing is excellent and I suggest you guys go to him for your local gunsmithing needs. Almost all the parts were purchased through Ty at http://www.midwestpx.com, a Calguns supporting vendor.
Here's some eye candy as a teaser for now, until I get everything together.
Just a quick picture literally minutes after kendog4570 came and dropped it off in person.
Build as pictured is as follows:
Mega MA-TEN receiver set
Armalite AR10 BCG
Noveske 21" Fluted 7.62mm barrel
-coated by kendog4570
SJC Titan .308 Comp
-coated by kendog4570
Troy 13.8" TRX-308 hand guard
Noveske AR10 rifle length gas tube
Magpul PRS .308 stock
Armalite AR10 rifle extension, buffer and spring
Unpictured:
Daniel Defense LPK
Phase 5 Tactical bolt catch
Armalite AR10 magazine catch
Raddlock Bullet Button
Ergo Tactical grip w/ palm shelf
Geissele SSA-E trigger
"Stubby" Magpul PMAGs from http://www.midwestpx.com
SWFA SS 5-20x50 HD scope is on the way, as well as scope mount (American Defense) and Atlas Bipod
Special thanks to Ken (kendog4570) for all of the gunsmithing work. Couldn't ask for anything better. As well as Ty @ http://www.midwestpx.com for supplying almost all the parts to this build.
Disclaimer: I am in no way associated for profit with kendog4570 or Ty @ MidwestPX, just extremely satisfied with their work, products and services enough to post about them and give them my continued business.
Not sure if you remember, but I made a thread a great while back (3-4 months?) about which receiver set to pick- Mega or JD Machine. Anyway, I went with Mega Machine's MA-TEN, and I couldn't be happier. I have all the parts together and I've built the complete rifle without using a single DPMS part.
The upper was built, coated and spec'd out by kendog4570, a fellow calgunner. Everthing is excellent and I suggest you guys go to him for your local gunsmithing needs. Almost all the parts were purchased through Ty at http://www.midwestpx.com, a Calguns supporting vendor.
Here's some eye candy as a teaser for now, until I get everything together.
Just a quick picture literally minutes after kendog4570 came and dropped it off in person.
Build as pictured is as follows:
Mega MA-TEN receiver set
Armalite AR10 BCG
Noveske 21" Fluted 7.62mm barrel
-coated by kendog4570
SJC Titan .308 Comp
-coated by kendog4570
Troy 13.8" TRX-308 hand guard
Noveske AR10 rifle length gas tube
Magpul PRS .308 stock
Armalite AR10 rifle extension, buffer and spring
Unpictured:
Daniel Defense LPK
Phase 5 Tactical bolt catch
Armalite AR10 magazine catch
Raddlock Bullet Button
Ergo Tactical grip w/ palm shelf
Geissele SSA-E trigger
"Stubby" Magpul PMAGs from http://www.midwestpx.com
SWFA SS 5-20x50 HD scope is on the way, as well as scope mount (American Defense) and Atlas Bipod
Special thanks to Ken (kendog4570) for all of the gunsmithing work. Couldn't ask for anything better. As well as Ty @ http://www.midwestpx.com for supplying almost all the parts to this build.
Disclaimer: I am in no way associated for profit with kendog4570 or Ty @ MidwestPX, just extremely satisfied with their work, products and services enough to post about them and give them my continued business.
Comment