Trying to set up some gear for playing at very long ranges. So far the AR-15 has a 30moa base which with the ring package I'm using sets the scope centerline 2.865 inches above the centerline of the bore (measured at the objective bell).
Given a typical 62gr load (using as a benchmark, later loads will be 75gr and up once I'm back in practice) 5.56x45 loading from an 18" bbl, I'm figuring my MINIMUM far zero range to be somewhere near 370 yards.
Did I totally bonehead the math on that or am I close. I realize exact isn't going to happen but I need to make sure my own math is right.
Anyone else out there have a 20 or 30 MOA mount on their AR?
Given a typical 62gr load (using as a benchmark, later loads will be 75gr and up once I'm back in practice) 5.56x45 loading from an 18" bbl, I'm figuring my MINIMUM far zero range to be somewhere near 370 yards.
Did I totally bonehead the math on that or am I close. I realize exact isn't going to happen but I need to make sure my own math is right.
Anyone else out there have a 20 or 30 MOA mount on their AR?

Comment