Czech VZ58 questions

[bigthaiboy]

The VZ2000 are made by Ohio Ordnance Works using a VZ58 parts kit with their own milled receiver, 922(r) compliant parts and a barrel extension to make it 16".

[troyus]

Chris and Myself can make you a 10rd magazine for your project.

If you have the kit that came with the demilled receiver stubs still in the kit, I'd be very interested in knowing where you got it.

I have the blue prints for a VZ58. If i can find a kit that has the front part of the receiver with the locking lug intact, I will build a CA legal VZ with a fixed 10rd magazine. The rifle is really very simple and similiar to the AK in the way you can make a receiver for it.


I planned to make a jig to spec and fill the missing sections with milled steel and rails welded on like on an AK (mill the side plates and use bent sheet "Rails" to make the ejectors, etc)


Anyway, mags are not a problem. You also might want to consider modifying the rifle itself to use AK47 mags since they are same caliber and much more common/cheaper.


Good luck.


J

I have a kit that has been cut, but still has the front of the receiver mated to the barrel and what have ya.... is this what you are looking for?

[Full Clip]

It would make a pretty sweet fixed mag, stripper clip fed rifle....

No to be a total wise-***, but you can buy quite a few nice SKSs for that much dough — another fixed-mag, stripper clip-fed rifle...

[troyus]

Or you could buy several mosin nagants for the price of one SKS.

Also, I am pretty sure I could get at least half a dozen knives for the price of a mosin.

Rocks are even better. I get 'em FREE. PM me for details.