80% lowers out of stock?

[destro360]

looking for some sources for 80% ar lowers that are not back ordered or
"out of stock" would like to pick up 2 soon while i have the cash. most places i've seen are sold out etc. any info would be helpful thank you.

[destro360]

damn i thought this would blow up with suggestions or links lol

[Lateralus]

Billet: Quentin Laser. I have one of these in my safe just begging me to be an AR pistol. Great machining.

http://quentin-laser.com/store/product_info.php?cPath=27&products_id=159

Forged: Tactical Machining. I plan on using their jig to complete mine, so you might as well buy a lower while you're at it.

http://www.tacticalmachining.com/products.php?pid=28#images/372_247_80-lower.jpg

NOTE: The TM lowers are out of stock right now. There was a thread in the Gunsmithing forum about them getting their lowers reaffirmed by the ATF for their 80% status. Seems the Achilles heel was the selector switch hole. According to the most recent ATF letter, there can be no machining of the FCG pocket. I would assume that they have pulled their remaining stock to finish into full lowers, and are in the process of making new 80% ones without the selector hole.

[destro360]

Billet: Quentin Laser. I have one of these in my safe just begging me to be an AR pistol. Great machining.

http://quentin-laser.com/store/product_info.php?cPath=27&products_id=159

Forged: Tactical Machining. I plan on using their jig to complete mine, so you might as well buy a lower while you're at it.

http://www.tacticalmachining.com/products.php?pid=28#images/372_247_80-lower.jpg

NOTE: The TM lowers are out of stock right now. There was a thread in the Gunsmithing forum about them getting their lowers reaffirmed by the ATF for their 80% status. Seems the Achilles heel was the selector switch hole. According to the most recent ATF letter, there can be no machining of the FCG pocket. I would assume that they have pulled their remaining stock to finish into full lowers, and are in the process of making new 80% ones without the selector hole.

thanks for the info i was looking at theirs and would have bought quite a few at that price! hope the price stays low! a friend of mine has some jigs and a mill i just need to pick up a few lowers. want to build one right away and have a couple for later on down the road. thanks again

[VaderSpade]

Tactical Machining is waiting on a new EDM machine, which was supposed to be on line by now. I read that when they do get it up and running they will get caught up fast.
There is also a new California company getting ready to introduce an 80% lower.

http://www.colfaxtactical.com