brands like the raddlock?

[thevic]

what are brands available for the ar15 that is similar to the raddlock by having the turn out adjustable mag release? when i have my raddlock opened up to release a mag by finger push the mag will wiggle out And fall out by itself from the shock cus of the spring being too light..i took a regular, stiffer spring and cut it down to size which somewhat fixxed the problem, but i never did like the feel of the raddlock to begin with.

[ARRRR-15]

You should look into my mag lock. The Vamfire M.L.D. (Magazine Locking Device).

Here's a link to my site.

https://www.vamfire.com

Feel free to contact me through my site or here on CGN if you have any questions.


Jimmy

[pacrimguru]

yes, the MLD is available here:

http://www.valkyrietactical.com/product_info.php?cPath=62&products_id=1626

[neomedic]

Does anyone else experience this with the Raddlock? I haven't had a chance to shoot it across the border yet.

[pacrimguru]

a ton of people love the raddlock.

[C_1]

There are lots of people who have the Raddlock BB and have had no problems. But screws backing out is not far fetched. Maybe you can just put a little tiny bit of loctite (very, very, very small dab) on the mag catch and then install the Raddlock. How about a P50 BB with a Freelock? The Vamfire MLD looks ok..

[barthel]

Never had an issue with my Raddlock, screwed in or out.

[Noah3683]

I like my raddlock a lot more than the BB design, but man that vamfire mld does look pretty damn sweet

[thevic]

i dunno if its something with a raddlock, pmag, abd noveske, but its definatley the radlock spring being too soft when opened causes the mag latch to wiggle and the mag will slip past

[thevic]

the MLD does look nice i just might give it a try...how come i see another model on the mfg site..the one with the red button

[Noah3683]

the MLD does look nice i just might give it a try...how come i see another model on the mfg site..the one with the red button

That is the free lock. they made that as well, It kind of works on the same principle as the radd with loosening the center nut, but it's made to go into an existing bullet button instead of replacing the entire unit. The design of the mld seems to address the "potential" issue of the center nut becoming too loose on the freelock or raddlock. The mld center nut remains stationary while the outer part of the button lowers or raises with the set screw to create a "fixed" or "removable" mag. I have a feeling this will become the "go to" design as far as versatile mag locks go

[doughboy334]

I used the Radlock but I had to retire it in order to use Thordo's magazine modification. I went back to the standard bullet button and reloading loaded mags are way faster now than it used to be before.

ARRR-15 will Thordo's magazine modification work with your button?

[ARRRR-15]

I used the Radlock but I had to retire it in order to use Thordo's magazine modification. I went back to the standard bullet button and reloading loaded mags are way faster now than it used to be before.

ARRR-15 will Thordo's magazine modification work with your button?

If it works with the prince50 Bullet Button then it will work with the M.L.D.. Contact one of my dealers, if they are near you I'm sure they won't mind you coming by to check/test it out.

http://www.vamfire.com/index_files/dealers.htm

Jimmy