AR-15 CA Compliance Maglock Kingpin or Juggernaut Hellfighter?

[Angrysnarf]

I went with kingpin and maglock v4 for the wife. Check out scr raider for pistol

[adam6955]

Featureless. Buy a sheet of kydex for $20 and do every rifle you own. Takes a knife, heatgun, cheap ahrbor freight clamp, and half hour per grip wrap.

[Markbsae]

I have the one from Supertool. Its easy to use, no modifications and you can remove it easily when you go to shoot in states that don't have retarded gun hating politicians like California. https://www.supertoolusa.com/product...supertool-pro/

[Sparrow Dynamics]

I?m a big fan of featureless and Sparrow Dynamics grips.....

Awesome! Thanks for the shout-out. We are doing our best to help fellow California gun owners, contributing to this community here, while also supporting pro-2A groups in CA. And we appreciate any help we can get.

[Dvrjon]

I am looking at the Hogue freedom fighter but this one requires you to drill a hole on your firearm. The Daniel defense that I am interested in is going for $2,300 so I am not sure if I want to start drilling in fear that I messed up?

[Tinknocker]

I have the Hellfighter on one of m y ARs and if you turn the pin the wrong way the pin comes out of its groove and you will have to back off your lock nut to fix it. I have the Sparrow grip on my featureless and like it so far as I have small to medium sized hands. The Hellfighter was the only one I could get before the deadline because I procrastinated.

[NaClAddict]

I have the Hellfighter on one of m y ARs and if you turn the pin the wrong way the pin comes out of its groove and you will have to back off your lock nut to fix it. I have the Sparrow grip on my featureless and like it so far as I have small to medium sized hands. The Hellfighter was the only one I could get before the deadline because I procrastinated.

I was able to back the detent in with an exacto knife blade and twist the pin back in place. Took 10 min of trying but once I figured it out it was easy. YouTube had a video that I found later, they used a small screwdriver which may be better for getting leverage on the pin.

[Ronin6]