AR Stripper clips?

[shakeyjake]

I did a shearch and came up with nothing.I have a fliptop M4 build, are there 10rnd stripper clips for faster loading? I have a prince 50 set up.

[cassius]

wut? You're saying you can't find any?

sweartogod, sometimes it's like feeding baby chicks.

http://www.google.com/search?hl=en&safe=active&um=1&q=.223%20stripper%20clips&ie=UTF-8&sa=N&tab=iw

[technique]

yes.

http://www.keepshooting.com/firearmaccessories/add-ons/ar15-m16-stripper-clips.htm

The old Shoeless Ventures had a devise that worked with their receivers to help load with strippers....don't know how you would do it with a standard lower though.

[shakeyjake]

FOUND THEM! CHEAPEN THAN DIRT.
Question now is do they work,has anyone used them,opinions will be appreciated.

[THT]

I have a ton laying around...pay for shipping and I'll send you however many you need.

[Marxman]

FOUND THEM! CHEAPEN THAN DIRT.
Question now is do they work,has anyone used them,opinions will be appreciated.

I ordered the stripper clips in question, and yes, they work flawlessly. I also ordered some guides, they fit PMAGs, and I can only speculate they'll work with the new M revisions I just ordered. OP, check for bandoleer packages, normally you can get the clips, guides, cardboard silencers, and a canvas bandoleer to store them in for the same price as the strippers and guides separately. The canvas is nice to store your ammunition in ammo-cans with because it reduces rattle and decreases the chance that your rounds will suffer cosmetic damage, if you care. Hope this helps.

[aplinker]

I did a shearch and came up with nothing.I have a fliptop M4 build, are there 10rnd stripper clips for faster loading? I have a prince 50 set up.

whoa.. whoa... whoa....

let's solve your real problem 1st.

Go get yourself a bullet button and dump that Prince50.

[Eroland7]

whoa.. whoa... whoa....

let's solve your real problem 1st.

Go get yourself a bullet button and dump that Prince50.

[Someoneelseok]

whoa.. whoa... whoa....

let's solve your real problem 1st.

Go get yourself a bullet button and dump that Prince50.

I agree too. Plus those stripper clips won't work with a fliptop build. The USGI stripper clip guides were designed to go on the magazine outside the magwell. On a fliptop build there isn't enough room to slide on the stripper clip guides.

After 1 range session you'll find yourself opting for a BulletButton...that's my $0.02.

[Marxman]

I figured he was taking his magazine out to reload it, the words "Prince 50" never even caught my eye. I need to go drink some coffee.

[aplinker]

I agree too. Plus those stripper clips won't work with a fliptop build. The USGI stripper clip guides were designed to go on the magazine outside the magwell. On a fliptop build there isn't enough room to slide on the stripper clip guides.

After 1 range session you'll find yourself opting for a BulletButton...that's my $0.02.

Yup... was a common thing back in the old days to rig stripper clip guides to fit into P50 builds.

[818gtiguy]

whoa.. whoa... whoa....

let's solve your real problem 1st.

Go get yourself a bullet button and dump that Prince50.

[RolinThundr]

... OP, check for bandoleer packages, normally you can get the clips, guides, cardboard silencers, and a canvas bandoleer to store them in for the same price as the strippers and guides separately...

Cheaper Than Dirt offers the bandoleer package: ARR-058

The stripper clips are meant to reload magazines- you will need a stripper clip guide, they do not reload the weapon directly like the SKS and AK stripper clips.

[Fate]

And the fastest way to load a mag: Hold like photo, slam mag home against hard object. Don't use your fingers and try and push the rounds down.

[reidnez]

And the fastest way to load a mag: Hold like photo, slam mag home against hard object. Don't use your fingers and try and push the rounds down.

Yep. It takes a bit of practice to get it right, if you put pressure on the wrong spot or at the wrong angle it will bind up. But it's very fast once you learn how to do it properly.