Bullet Button Stuck

[HK Dave]

Hey guys, was wondering if anyone has come across this problem.

I tried to remove the bullet button installed by Rainier Arms on my DDM4 lower and it seems to be stuck.

Could it be loctite? Any suggestions on removing it without wrecking it?

[69Mach1]

Which Bullet Button? Are you trying to remove the lock ring or the BB housing itself?

[HK Dave]

BB housing.

Prince 50

[10RoundLimit]

stick a punch through the backside and pop it out.

[69Mach1]

BB housing.

Prince 50

The inserted side is flared so it's in there very tight, as it's supposed to be. After removing the mag catch and spring, look down the hole. You should see a little of the housings edge. Use a punch to carefully punch it out.

[HK Dave]

Punch worked great! Thank you gentlemen!

[tenpercentfirearms]

Also note the BB fits extreamely tight on the DD rifles for some reason. I just ordered a cusrom set of BBs from the Princes to try specifically in those guns.

[HK Dave]

Ah... so its the DD lowers... i didn't find it difficult on any other install so i assumed it had been somehow loctited... thankfully it was not.