YM N/M M16 BCG Problems

[Justintoxicated]

so I got another one, but its not staked. So how much will it cost me to properly stake this thing?

[Addax]

so I got another one, but its not staked. So how much will it cost me to properly stake this thing?

If you are in my area, drop by, and I will use my MOACKS tool and stake the key for you at no cost.

We are in Chatsworth.

[Justintoxicated]

I'm in Long Beach

[Josh3239]

A hammer and a punch will do it. But I am sure Randall at AR15barrels.com will do it for a very reasonable price.

[Addax]

I'm in Long Beach

Just a 45 minute drive up to Chatsworth, 1 hour with traffic.

It will take no more than 5 minutes.

If you want to do it yourself, you can pick up a punch and hammer and do it yourself.

Here is how I stake them.

The MOACKS tool dimples the sides of the key, and I use a pointed punch to stake the screw/key.

You can just use a small punch and hammer and stake the screws/key and that should be good. I know that Young Mfg. uses a Loctite type of compound on the screws.

(I borrowed this pic from another forum, but this is how I do it with the MOACKS and a Punch)

[Jujak]

Is it really necessary to stake the Y/M NM bolt keys?
According to Steve at Y/M, the lock tight they use on it is more then enough to hold the key without it ever coming lose.

[Josh3239]

Is it really necessary to stake the Y/M NM bolt keys?

Yes

[Jujak]

Yes

Are there any places/anyone in the los angeles area that will stake bolt keys?

[Addax]

Is it really necessary to stake the Y/M NM bolt keys?
According to Steve at Y/M, the lock tight they use on it is more then enough to hold the key without it ever coming lose.

No matter what, I always stake the screws.

[Jujak]

No matter what, I always stake the screws.

yea everywhere i read, everyone says to stake the screws, now i just gotta find someone local that can do that for me.

[818gtiguy]

yea everywhere i read, everyone says to stake the screws, now i just gotta find someone local that can do that for me.

If you are in my area, drop by, and I will use my MOACKS tool and stake the key for you at no cost.

We are in Chatsworth.

I guess that anwsers your question....

[Jujak]

I guess that anwsers your question....

OMG REALLY!!!THANKS!!!!!! .................................................. .................................................. .................................................. .........................................

[HkUSP45]

OMG REALLY!!!THANKS!!!!!! .................................................. .................................................. .................................................. .........................................

He was messing with you.

[JeffM]

http://www.ar15.com/forums/topic.html?b=2&f=130&t=160446

[maxicon]

It's really easy to stake the screws. A hammer and punch, blunted screwdriver, whatever...