Yugo AK OAL muzzle extender?

[Steve O]

So I need to bring a yugo ak to legal length for CA.
It's currently 24" folded. But it needs to be 30" or was it 27"?

Anyhow does anyone know where I can get a extender?
And is such extender legal if it simply screws on to the stock ak barrel threads?

[Trendkill]

Since this topic is here....I would like to know what everyone has to say about attaching a bayo to the rifle while folded to keep its OAL at 30" +.....cuzz were talkin OAL and not barrel length....right??

[DB2]

CURRENTLY it's 24"? Um uh um.............................................











Please don't work the calguns booth.

[Trendkill]

CURRENTLY it's 24"? Um uh um.............................................











Please don't work the calguns booth.

Do you know about the bayo thing???

[DB2]

Do you know about the bayo thing???

OAL is OAL. Just becareful when the bayo is on and when it is off. I personally don't like the idea.

[Trendkill]

OAL is OAL. Just becareful when the bayo is on and when it is off. I personally don't like the idea.

I just dont like the idea of welding or pinning a perfectly good folder....or adding some type of stupid long muzzle device when a simple bayo attachment would suffice for OAL requirements.

[DB2]

I just dont like the idea of welding or pinning a perfectly good folder....or adding some type of stupid long muzzle device when a simple bayo attachment would suffice for OAL requirements.

No weld or pin. Try putting the internals together backwards or you can take out the spring and use a sleeve where the spring is.

[Trendkill]

No weld or pin. Try putting the internals together backwards or you can take out the spring and use a sleeve where the spring is.

Oh....thats not a bad idea. Thats a little less gray I guess.

[69Mach1]

The Yugo UF AK is a little under 26 inches long with the stock folded if you measure from it's longest point going back from the bare threaded muzzle, the back of the Yugo pistol grip.

Use this to get it over the 30 inch OAL needed. This is of course built as a fixed mag rifle.
5.5 inch extended muzzle brake. 14MM LEFT HAND THREADS


Attaching a bayonet that extends at least 4.5 inches from the muzzle will work also.

[Steve O]

CURRENTLY it's 24"? Um uh um.............................................











Please don't work the calguns booth.

Jezz. I didn't say it was in CA.
You guys always assume to worst.

It's in Reno sitting at in my moms garage.

[Steve O]

Bayo lug? Permanently? Or just put it on?

I would a AMD flash suppressor work?

[redneckshootist]

I will have some 6" flash hiders ready next month. I just have a lot of crap going on right now. but they are almost ready.

[DB2]

Jezz. I didn't say it was in CA.
You guys always assume to worst.

It's in Reno sitting at in my moms garage.

Sorry, with all the n00bs around here it's sometime best to assume.

[God Bless The Mauser]

A hose clamp would be good to fix the folder because it would keep the button from being pushed and it's not permanent.

[69Mach1]

Bayo lug? Permanently? Or just put it on?

I would a AMD flash suppressor work?

The Tapco AMD extended FS is too short to use. I actually prefer fixing the stock on mine.

Cut a tube of the same diameter as the shaft in the underfolder mechanism in half and clamp in place with a hose clamp.