Tweet
I just dis-assembled and cleaned the BCG. After putting it all back together, I thought about putting a spent shell in the chamber to check and see if it will eject properly but after I pressed the bolt catch and tried to pull the charging handle, it wont budge! What went wrong?
-
-
Whoops. -
Separate the upper and lower. Try to work the bolt carrier and bolt loose from the bottom. Take your time with it. Make sure your gas key is tight on the carrier. Make sure your bolt is installed with the extractor on the ejection port side, not all bolts are properly tapered for the cam pin. Good luck.Comment
-
I'd buttstock slam it, but that's just me... it's a rifle, not a woman.
Wait... ummm... works for that, too.
Google Map of OLL Dealers
List of CA-friendly Manufacturers, Dealers, Middlemen, and Magazine rebuild kit dealers
Click me-->So you're a n00b and you want to build an AR? <--Click me
This post is based on actual events. Some facts may be altered for dramatic purposes. All posts are pure opinion. All persons, living and dead, are purely coincidental, and should not be construed.Comment
-
Yep...
Grab the charging handle, pulling down, and slam the rifle down (buttstock side) on a hard surface.Artist formally known as CEO of Tracy Rifle and PistolComment
-
Oh wow! thanks guys. You're right uclaplinker sir, its not a woman. I was afraid of messing it up further and was being to soft on it. One buttstock slam and it ejected the casing.Comment
-
Google Map of OLL Dealers
List of CA-friendly Manufacturers, Dealers, Middlemen, and Magazine rebuild kit dealers
Click me-->So you're a n00b and you want to build an AR? <--Click me
This post is based on actual events. Some facts may be altered for dramatic purposes. All posts are pure opinion. All persons, living and dead, are purely coincidental, and should not be construed.Comment
-
There are currently 2999 users online. 149 members and 2850 guests.
Most users ever online was 65,177 at 7:20 PM on 09-21-2024.
Comment