Prince 50 or Raddlock?

[Clark_Kent_X]

do you prefer the Prince 50 or Radlock? based on reliablity (working in sand, mud, seawater, etc.) and ease of manipulation?

[hawk1]

Princes' Bullet Button for the win for AR style platforms!

What rifle are you comparing it for?

[Clark_Kent_X]

my AR15 and AR10

[Cal-Irish]

DOJ

Isnt the prince 50 sketchy in the eyes of the DOJ? They say its too easy to back out the set screw setup or something.

[Clark_Kent_X]

so is the bullet button. there was a guy here in san diego and a female cop checked out his rifle....it had a bullet button and she had some filed down fake nails and was able to release the mag and sited him on the spot for have a class 3 rifle

[shark92651]

so is the bullet button. there was a guy here in san diego and a female cop checked out his rifle....it had a bullet button and she had some filed down fake nails and was able to release the mag and sited him on the spot for have a class 3 rifle

Do you have first-hand knowledge of this? That sounds totally made up to me. A fake plastic fingernail, shaped specifically to insert into a bullet button, and then glued to you finger would be a tool anyway.

To answer your question though, I think they are both fine locks. The Raddlocks two styles of operation are great for people that shoot out of CA or share the lower with a rimfire upper. The Bullet Button is less expensive and is great if you mostly shoot inside CA. If you do shoot outside CA, you can add the BB Wrench for a few bucks more to get finger-press operation. I wouldn't bother with a Prince50 (set screw style) anymore.

[hawk1]

so is the bullet button. there was a guy here in san diego and a female cop checked out his rifle....it had a bullet button and she had some filed down fake nails and was able to release the mag and sited him on the spot for have a class 3 rifle

26 posts and you're already spreading FUD...

Good job!

[Clark_Kent_X]

i dont have first had knowledge no. buddy of mine who works at the gun store told me this. ofcourse he heard it from someone esle who heard it from thier mother's uncle' second cousin's brother in-law

[Clark_Kent_X]

OMG i'm a dusch!!!

[lasereye]

OMG i'm a dusch!!!

Your a douche for saying your a dusch.

[lawaia]

I stopped reading when you said it was a buddy that worked in a gun store that told you!

[ke6guj]

Isnt the prince 50 sketchy in the eyes of the DOJ? They say its too easy to back out the set screw setup or something.

http://www.calguns.net/calgunforum/showthread.php?t=150568

so is the bullet button. there was a guy here in san diego and a female cop checked out his rifle....it had a bullet button and she had some filed down fake nails and was able to release the mag and sited him on the spot for have a class 3 rifle

I do remember the guy posting about that one. Not cited as a Class 3 rifle, but it was confiscated and hadn't been returned last I heard.

here it is. http://www.calguns.net/calgunforum/s...ghlight=finger

[hawk1]

OMG i'm a dusch!!!

No, you have a cool avatar, so I wouldn't go that far...

[mvpatriot]

only radd I run is on my Coharies. The BB on the ARs and the JumboPanda is a must for AKs

[Clark_Kent_X]

No, you have a cool avatar, so I wouldn't go that far...

thanks Hawk1 atleast my pervertedness gets me somewhere...but ke6guj did say he heard about that happening. i was just wrong about the poor guy being sited