Unconfigured Ad Widget

Collapse

Magpul CTR Help Please delete problem fixed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • socom2
    Junior Member
    • Feb 2009
    • 72

    Magpul CTR Help Please delete problem fixed

    I just purchased a Magpul CTR Carbine stock and also purchased a Bravo Company Hardware Mounting Kit "Mil-Spec" http://www.bravocompanyusa.com/Produ...E+KIT&CartID=0

    It seems that the stock only goes in a little ways and does lock but can not go any further. I can't get it past the first position, any suggestions or if I missed something

    Receiver Extention - Mil-Spec, 6 position

    Receiver End Plate

    Lock Nut (Castle) M4

    Action Spring, Carbine

    Buffer Assembly, Carbine Std (options for H, H2)

    __________________________________________________ ___________

    Magpul

    From Magpul:

    CTR Carbine Stock Mil Spec

    The patent-pending Compact/Type Restricted (CTR) is a drop-in replacement for the standard stock body. Designed for stability, the CTR utilizes a shielded operation lever and a friction locking system that secures the stock to the buffer tube for zero movement.

    Note: There are two types of buffer tubes (receiver extensions) in common use: Mil-Spec and Commercial. If you have a Commercial buffer tube on your rifle, make sure you order the Commercial CTR, stock number MAG311.

    LOP Adjust= 3.3 inch

    MIL-SPEC CTR RESOURCES

    Features

    * Friction locking system that eliminates all stock movement.
    * Sloping cheek weld for improved user interface
    * Ambidextrous sling mounts for QD, 1.25" loops, and lanyard hole
    * Side mounting slots for cheek risers

    Specifications

    * Weight: .0785 pounds without rubber butt-pad or spacer butt-pad
    * Collapsed Length: 7.2" without rubber butt-pad or spacer butt-pad
    * Extended Length: 10.5" without rubber butt-pad or spacer butt-pad
    Last edited by socom2; 03-27-2009, 6:45 PM. Reason: Please delete- problem fixed
  • #2
    copenhagen269
    Member
    • Jan 2009
    • 341

    Are you sure that you pulled the two little pins down to get it engaged?

    Comment

    • #3
      Alecks
      Member
      • Mar 2009
      • 309

      yep theres two pins you have to push down on right under the release lever

      Comment

      • #4
        socom2
        Junior Member
        • Feb 2009
        • 72

        those are hard as hell to push down any recommendations how?

        Comment

        • #5
          Alecks
          Member
          • Mar 2009
          • 309

          grab a towel or a piece of cloth

          Comment

          • #6
            socom2
            Junior Member
            • Feb 2009
            • 72

            Oh wow that worked, thank you

            Comment

            • #7
              copenhagen269
              Member
              • Jan 2009
              • 341

              Comment

              Working...
              UA-8071174-1