engraving 80% thats now 100%

[Sam .223]

I don't want to start another one of the loooooong 80% threads so i have a simple question, just to make sure my understanding of the law is correct. Here goes. If i had an 80% that i completed to 100% can i still use my own serial and then vol reg it? this would be a rifle with a new mag lock like the freedom fighter. if i remember correctly the DOJ serials start in July correct?

[edgerly779]

yes been answered many times.

[BarrettM99]

Also, if you just get them engraved but not register your serial numbers, model, etc...you’ll have to obtain their serial number and get that info engraved in addition to your own. Yours would just be “decorative” at that point. So be sure to register.

[Sam .223]

that's what i figured, thanks for the replies.

[Sam .223]

can i vol reg just a stripped lower or does it need to be a built rifle?

[Grendl]

I used Mike at www.atomicengraving.com. Excellent work!

[Sam .223]

I just recieved my lowers from the engraves, now what i need to find out is do i need to assemble them to register or can i just register as a stripped lower?