sgl 23 mag block replacement help

[Cadre]

sup bruthas, im looking for someone local who can replace a trigger guard assembly / mag block so i can go release mags easier when i go featureless in the future on a sgl23. or if this is something a monkey like me can do can you give me instructions so far the interweb search came up with zero.

[D.A.V.I.D.]

I know solar tactical in Livermore will do it.

[Dhena81]

Drill it out the rivet and install the new parts.

[javithewrench]

Pretty easy, hardest part is holding the spring in place. I used a set of needle nose pliers. Before flaring the new pin or rivet, test fit a couple different mags. I had to slightly modify my catch release.

[Cadre]

Drill it out the rivet and install the new parts.

Pretty easy, hardest part is holding the spring in place. I used a set of needle nose pliers. Before flaring the new pin or rivet, test fit a couple different mags. I had to slightly modify my catch release.

problem im having is no rivet tools i can invest in one but with this california snafu that tool might only be used this one time.

[Varg Vikernes]

Would this work?

http://www.carolinashooterssupply.com/SAIAG_12_RAM_STG_TRIGGER_GUARD_BOLT_ON_p/ram-s12tg-trigger-guard.htm

[kalieracer]

Do not remove the trigger guard. All you need to do is swap the mag catch.

sup bruthas, im looking for someone local who can replace a trigger guard assembly / mag block so i can go release mags easier when i go featureless in the future on a sgl23. or if this is something a monkey like me can do can you give me instructions so far the interweb search came up with zero.

[beanz2]

Do not remove the trigger guard. All you need to do is swap the mag catch.

good opportunity to try this kit:

[Cadre]

Do not remove the trigger guard. All you need to do is swap the mag catch.

good opportunity to try this kit:

awesome! will give that a shot.....

thanks everyone.

[M1XdColt]

Wow I been wanted to do this for a while too on my sgl 23 also. Never really hear no talk about the model 23.