So whose got....

[anotherted]

...decent FAL 10 rounders. and the mag lock kit?

[C.G.]

There really doesn't seem to be any "one stop shop". If you're in a rush and not willing to shop the internet and wait, CGW for the modified mag catch and DSA for the FN 10 rd FAL mag (Get a US made floor plate while you're at it).

Or you can make your own catch; all you need is a drill and tap and about 20 to 30 minutes of your time.
+1 on the DSA mags, even the factory seconds are better than anything else.

[Blue]

I got my 10rd mag from DSA. Costed $15 bucks from their "blem" sale area. I can't find anything wrong with it. I also did the mag lock myself. DSA seems to take a long time to ship too.

[JPglee1]

I have an entreprise 10rd... all it is, is a cut-down 20rd metric surplus mag... still had cosmo in the nooks and crannies. US-made my arse.


JP-designed mag lock on left... Custom made myself


JP


P.S. Should I start selling my mag lock design... no mod to your mag release and NO DOUBT its a MAG LOCK and not a mag release w/a setscrew in it that corrupt LEO could remove.... would be CHEAP to make on EDM or waterjet machine

[C.G.]

I have an entreprise 10rd... all it is, is a cut-down 20rd metric surplus mag... still had cosmo in the nooks and crannies. US-made my arse.

I had one Enterprise mag, no matter what I did short of JB weld, the floorplate would get loose after a few rounds. And I think only the floorplate and spring are US made.

[JPglee1]

And I think only the floorplate and spring are US made.

Not mine, you can clearly see the cut on the surplus spring from some dykes and it has a standard metric floorplate...


sheisters, eh?


J