As I approach 70 years of age, I find myself becoming more and more sensitive to recoil. Even the moderate calibers like the 7-08 beat on me to the point where range sessions these days are limited to about a dozen shots. I have noticed some folks using the Caldwell Lead Sled device with good results. Can any of you folks that have actually used one share your experience, please? Thanks...
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Lead Sled experience, please?
Collapse
X
-
If recoil is that bad, likely a good idea. I've rented one a few times for my .308. It worked well enough I wasn't too concerned about recoil, or the rifle going anywhere. You'll be able to shoot more but will have to carry it back & forth, maybe make a separate trip. I think it's a good idea, bump.Yes I took the pic, no I didn't go swimming! -
They work. If shooting a heavy recoil(such as a mag) with a wood stock and you use a lot of weight on it to cancel all recoil you could crack the stock.Last edited by Divernhunter; 01-20-2015, 8:36 PM.A 30cal will reach out and touch them. A 50cal will kick their butt.
NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society memberComment
-
Have you considered a muzzle brake?
They reduce the recoil significantly.Randall Rausch
AR work: www.ar15barrels.com
Handguns: www.handgunbarrels.com
Bolt actions: www.700barrels.com
Foreign Semi Autos: www.akbarrels.com
Most work done while you wait on a scheduled shop visit.Comment
-
Ive got one and its pretty good. I use it when I am chronographing and testing a load for accuracy more to remove the human factor than its recoil reducing properties"You see in this world theres two kinds of people my friend. Those with loaded guns, and those who dig... You Dig" Blondie from TGBUComment
-
A buddy has one, and he melted two giant hunks of lead which molded perfectly to sit in the trays. I shoot my .458 WinMag with hot loaded 510 grain solids out of it, and the recoil is very tame...the only problem is that the safety engages when shooting from that solid of a rest.
Simple bagged shot would probably work just as well. I like using it for load development and to remove my (probably very large) error.Comment
-
-
Gary, while it may attenuate recoil you might find shooting with one kills the fun.
Have you considered having one or more rifle rechambered? A 6BR or .223 are fun to shoot and nearly recoil-free.Comment
-
"Use the shiny toys when you have them, but never, ever forget how to do it by hand." --- SGT. David Sillick A. Co. 4-64 AR, 3IDOriginally posted by 0321jarheadAccuracy is not always the rifle, its the nut behind the stock.
Everything is METTT-CComment
-
I use mine much the same as Noonanda. I have the SOLO model. It allows me to cycle my lever gun and remove mags from ARs without removing the rifle. Relatively small investment, so if it will keep you at the range, by all means go for it. Downside is, another large item to haul to and from the range.Comment
-
I cracked the stock, sighting in a 300WSM, using a Lead Sled with a twenty-five pound plate. The stock had a knot, right in the tang, and probably was going to crack no matter what. But I am sure the Lead Sled contributed to the stock failing early...while it was still under warranty.Comment
-
I've used a Lead Sled to sight in a rifle. One of the local ranges has a few for rent. Worked fine.
If you still want to shoulder a rifle, get a 223 with a nice muzzle brake and you'll hardly notice any recoil. If you're looking to get away from shouldering a rifle, and don't mind dragging around an extra 30 pounds of gear, the Lead Sled is a decent option.

Comment
Calguns.net Statistics
Collapse
Topics: 1,870,897
Posts: 25,177,302
Members: 358,862
Active Members: 5,395
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 31054 users online. 117 members and 30937 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment