Smokin deal on DBM...

[Capt Beach]

Mods feel free to poof this post if inappropriate but I thought I'd pass along a deal for peoples GHSR's...Ground Hawg Sniper Rifles

CDI a maker of tier one DBM bottom metal is offering a JULY special...buy their bottom metal for your rifle and get your stock inletted free, also offering install and fitting of the bottom metal for free as well...this bottom metal uses AICS mags...the finest mag out there...I have two of these setups and they are exceptional pieces...CDI stands behind his products too...I am sending him another stock this month...



If you've been wanting to pull the trigger on putting a DBM box magazine system on your rifle NOW is the time to do it...all BM are $209 + shipping, inletting is a $125 value... it effectively lowers the price of the bottom metal to $84.00

Details here...

http://www.cdiprecisiongunworks.com/

They currently offer DBM bottom metal for;



Ruger Gunsite Rifle(GSR) Drop In Replacement.
Tikka 595 Short Action Rifle in 223/308 and similar calibers.
Tikka T3 (Long and Short Action).
Howa 1500 Short and Long action.
Weatherby Vanguard and VAnguard II Rifles(Same as Howa 1500).
FN-SPR Rifles (Also works on FN-PBR Rifles).
Winchester Short Action (All Post '64).
Winchester Long Action, Short Box (308 Win Length).
Winchester Long Action Magnum Length (7MM Rem Mag and 300 Win Mag).
Remington 700 Short Action (308 - 300 WSM/7MM WSM, 223 mags work as well).
Remington 700 Long Action (300 WM, 338 Lapua, 338 CIP Mag box is available).
Savage Short action DBM..for both earlier Stagger feed(4.275" Hole Spacing)models and newer Center feed(4.400" Hole spacing).
Savage Short and Long Action With Low Bolt release in Trigger Guard.
Stevens 200 Long and Short Actions(Same as Savage Center Feed Rifles).
Savage Long Action(Call for Tech Data).
Mauser 98 Large Ring action in 308 mag box size.
Kimber 8400 Tactical Short and Long Action.

[ar15barrels]

For anything other than a Remington 700, CDI is probably the way to go.
For a 700, PTG often puts their bottom metal on sale for $75 and I charge $75 to inlet a stock for it.
Net cost ends up being $150 plus an AICS magazine.

[RookieShooter]

Does their kit fit on the Rem 700 5R 308 with HS Precision stock?

[ar15barrels]

Does their kit fit on the Rem 700 5R 308 with HS Precision stock?

Any factory short action 700 stock will require inletting for an AICS magazine compatible bottom metal.

[RookieShooter]

Thanks for the info, Randall.

[ar15barrels]

Thanks for the info, Randall.

There are two options that "drop in" to factory stocks.
Both use proprietary magazines.
Both suck.

Most people that try either one will end up switching to AICS mags and DBM in the future if they ever try to seriously use the gun.

[pklin1297]

Had a CDI DBM in my Howa 308 before. Took a bit of work to make it work but the DBM was not at fault; the Howa action just took additional trim work to make it work with the AICS mags. Quality part and great company to work with. Like Randall said, for Rem 700s there are better options...

Shameless plug for my HS Precision stock, inlet by Randall himself, with PTG DBM for sale... http://www.calguns.net/calgunforum/s...d.php?t=953447

[G-Man WC]

For anything other than a Remington 700, CDI is probably the way to go.
For a 700, PTG often puts their bottom metal on sale for $75 and I charge $75 to inlet a stock for it.
Net cost ends up being $150 plus an AICS magazine.

PTG = Pacific Tool & Gauge?

[MongooseV8]

Yep

[postal]

I run CDI on my savage. Works fine.

Luckily, I know someone that has a CNC mill who inletted my stock for me.

Otherwise, this is a good deal...

And Randall (AR15Barrles) works on my guns too. Though I outsourced the milling to someone else for the CDI.... Randall does really great work at good prices.

[Hoser!!]

What about B&C stock?

[ar15barrels]

What about B&C stock?

Treat them the same as an HS stock.