Unconfigured Ad Widget

Collapse

Winchester .375 bullets

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BobCGun
    Junior Member
    • Feb 2014
    • 4

    Winchester .375 bullets

    Well I looked through the categories and didn't anything on the .375 so I started a new one.
    My son and I are getting back in to pig hunting. We both have the Winchester Big Bore 94 .375. We only have about 100 rounds left and maybe 25 empty brass and since the ammunition is no long being made I located a set of reloading dies, ( I reload for my other guns now). I am having trouble finding the bullets for the .375. I use to use a 220 grain made by Spears. Does anyone know where I can find bullets. May need to stock up a bit as thing are getting worse. Don't want to get in to casting. Thanks Bob
  • #2
    Whiterabbit
    Calguns Addict
    • Oct 2010
    • 7602

    where are you located? near silicon valley by chance?

    Anyways, check LGS, particularly the ones that are dusty and messy. They often have gems like boxes of older jacketed bullets in the bottom of a bin somewhere. All too often they have ridiculous price stickers on the boxes, and will accept significant discounts for cash just to get the stock out of the store.

    Comment

    • #3
      dfletcher
      I need a LIFE!!
      • Dec 2006
      • 14813

      Originally posted by BobCGun
      Well I looked through the categories and didn't anything on the .375 so I started a new one.
      My son and I are getting back in to pig hunting. We both have the Winchester Big Bore 94 .375. We only have about 100 rounds left and maybe 25 empty brass and since the ammunition is no long being made I located a set of reloading dies, ( I reload for my other guns now). I am having trouble finding the bullets for the .375. I use to use a 220 grain made by Spears. Does anyone know where I can find bullets. May need to stock up a bit as thing are getting worse. Don't want to get in to casting. Thanks Bob
      Grafs is pretty good for the "sort of unusual" older stuff. They have 375 bullets in stock, but not cast type. Penn Bullets has very good cast bullets. They're not exactly quick on delivery, but they have a good variety of stuff.

      If you're near San Jose I'd say visit San Jose Gun Exchange on Almaden - there's no "dustier and messier" gun store around, they have all sorts of stuff sitting about. I don't know if they're back to selling guns, but that would be my stop for scrounging up reloading supplies.
      Last edited by dfletcher; 02-06-2014, 11:22 AM.
      GOA Member & SAF Life Member

      Comment

      • #4
        Whiterabbit
        Calguns Addict
        • Oct 2010
        • 7602

        they are not, but its a GREAT opportunity to buy an antique or muzzleloader. They are very likely to have a .375 "something" laying in the bottom of a box in some corner somewhere, if you are not picky about bullet type.

        Comment

        • #5
          Wrangler John
          Senior Member
          • Oct 2009
          • 1799

          .375 Winchester ammo, bullets and brass are seasonally produced items, which means the manufacturers make a run every once in awhile. I purchased a couple hundred Winchester cases about three years ago to cut down for .375 Super Mag revolver cases.

          Cases however are not a problem for the handloader. I used to use the .375 Winchester cases reformed into .30-30 brass for use in a .30-30 Contender, and then into 7mm IHMSA Rimmed for use in a Wichita Silhouette Pistol. .30-30 cases are the same head dimension as .375 Winchester, both are .506" at the rim and .420" (.30-30), .420" (.375 Winchester) at the head, the Winchester .375 cases I just miked were .415" at the head. After firing the case ahead of the solid web should expand to .422" depending on the chamber.

          New full length sized .30-30 brass can be expanded to .375" in two steps by using a .308" to .358" tapered expander die, then expanded from .358" to .375" using another tapered expander die. The cases are then run into a .375 Winchester trim die and the excess filed off. Load as normally, using a moderate load to fireform. Do not push loads to maximum as the .375 Winchester cases are a little lighter in the web than .30-30 brass and will last longer if loaded below maximum. Before expanding the case mouths are chamfered and the necks lubed with a case lube such as Hornady's Unique or other greasy stuff. Some brass will split, but remember they were originally manufactured as a cylinder and then necked down during manufacture, so you are reversing the process. I formed hundreds of .30-30 Winchester into .358 Herrett rounds with very little brass loss. I do not recommend nickle plated brass they will be a bit brittle. Also Federal brass was at the time a bit heavier, my preference was Winchester Brass first, Federal second, Remington third.

          There should be no problems with the former .30-30 neck forming into the .375 Winchester as expanding causes thinning of the case wall, so no reaming should be necessary.

          RCBS, Redding, and Forester should have the expanders and trim die.

          Hornady's 220 grain FN is listed as a seasonally run item at MidwayUSA and the web page has an "Ask to Notify" button.

          Sierra Bullets 200 grain FN is also listed as "Out of Stock, Back Order Okay".

          The Barnes Original 255 grain FN is in stock.

          If you want to try a cast bullet, Beartooth Bullets 250 grain LFA gas check bullet is still listed. I use this bullet in my Dan Wesson .357 Super Mag.

          Beartooth also offers the .365 grain FN gas check bullet. Both are recommended for the .375 Winchester. Both can be ordered sized to your barrel for best accuracy.



          Providing you don't need lead free bullets, your ammo is doable.
          Last edited by Wrangler John; 02-06-2014, 1:19 PM.

          Comment

          • #6
            gunboat
            Veteran Member
            • Apr 2008
            • 3288

            Seems like it would be easier to just trim a 38/55 case to length --
            There is/.was some .375 bullets on craigslist - south bay --

            Comment

            Working...
            UA-8071174-1